'05 FZ6 injectors

[azbusa]

Hi all. I'm asking if anyone has information they'll share on finding and removing possibly fouled injectors on an '05 FZ6. I'm pretty sure that I've asked this question here recently, but haven't yet seen an answer. If a moderator or member has first-hand knowledge, or a link to help from someone else who does, it would really be very much appreciated. I've been through the plugs, the pump/filter, fresh Chevron with injector cleaner, etc, but the thing won't run beyond idle (if that) unless I deliver gas or ether directly into the intake at which time it's strong to the redline.Thanks. azbusa and his frustrated Yam neighbor (who keeps waving this sign: :Im With Stupid :shakehead:

 

[Hellgate]

An ultrasonic cleaner is perhaps the best way to fully clean them. Im only aware of one shop that does this, I'm sure there are others.

Sent from my LG-P925 using Tapatalk

 

[TownsendsFJR1300]

Read this post, he had similar problems and got it fixed on his own:

http://www.600riders.com/forum/fz6-technical/41746-no-fuel-pressure.html

 

[azbusa]

An ultrasonic cleaner is perhaps the best way to fully clean them. Im only aware of one shop that does this, I'm sure there are others.

Sent from my LG-P925 using Tapatalk

Thanks for responding, Hellgate and Townsend. We know the injectors can be cleaned and replaced but we must find them and remove them first. We do not have a service manual, so we are asking for a little more detailed info on how to access the parts.:don'tknow: The dealership says it's a real job, but we have a huge hammer and since one of us was a certified wrench back in '76, we think we might get by with a little help from our friends!:noworries:

 

[TownsendsFJR1300]

Thanks for responding, Hellgate and Townsend. We know the injectors can be cleaned and replaced but we must find them and remove them first. We do not have a service manual, so we are asking for a little more detailed info on how to access the parts.:don'tknow: The dealership says it's a real job, but we have a huge hammer and since one of us was a certified wrench back in '76, we think we might get by with a little help from our friends!:noworries:

PM me with an e-mail address and I'll forward an 07 and up factory Yamaha manual.

It'll be later as I'm not home at this moment. It should be the same set up..



Check this link, there should be a manual there as well if you need it ASAP:

http://www.600riders.com/forum/fz6-technical/28030-full-workshop-service-manual-2007-fz6.html


Glancing at my manual, it looks like pretty much like disconnecting the electrical connectors to each injector, remove the fuel rail, and the injectors come out. There is an 0-ring under each injector...

 

[TownsendsFJR1300]

You got mail!