gears

  1. S

    Trans slipping?

    Okay so, idk if its just my driving or what, but when im in 3rd gear, and i go to switch to 4th, when i pull the clutch in and shift up real fast all while holding the throttle, when i shift to 4th, the rpms stay the same as if i was still in 3rd, then gradually go back down as if i upshifted as...
  2. Pujazuba

    When do you shift up

    When do you people shift up say during a gentle drive in city traffic. I switch gears up at no less than 3000 rpm when there's no particular need for quick acceleration. Afterwards cruise at just above 3000 rpm, usually > 3100 rpm.
  3. 2wheelieadv

    Bike doesn't have the right pull?

    I don't know if I imagining this, but I feel like my bike (2006, 35k mi) is working too hard, especially in lower gears, and off the start. It still pulls good, but sounds as it has to work harder/busier to get there. Has anyone experienced it?
  4. B

    Victory Empulse TT

    Victory Motorcycles is coming out with an all electric bike, end of this year. Only $20K! I've always liked the workmanship on Victories, only thing bad I've heard about them is their gearboxes aren't very smooth. Surprisingly, this thing has a six-speed gearbox! Electric cars that I know of...
  5. TheMicahLay

    Uneven RPMs when cruising in lower gears

    I've noticed when cruising at a constant speed with the throttle staying in one position in the lower gears, mainly 1-3, the RPMs like to fluctuate a bit. Not enough to cause any noticeable jolt/chugging feeling, but I can definitely hear it. Is this normal on our bikes? Seems like other inlines...
  6. Love@FirstRide

    Got her!

    Some of you may have seen my posts about getting an fz6..... Picked her up yesterday 2007 red the sexier? one 3250 Never been droped.... 7900 miles soo clean... garage and show room floor Queen. Stock rear tire so that will have to go, The shifting is clunkier than i thought it would be...
  7. S

    FZ6 gears

    Hello, I recently bought a FZ6 S2 2009 as my first bike and was wondering how many gears it has. The manual says it has 6 but the dealer says it's OK as it is with 5 gears (1 down and 4 up). WHo should I believe? Please don't judge me - I am a new biker and don't really know the technical...
  8. M

    Gear Grinding into first

    Ok, so I'm not the most technically minded person in the world, and i've got a problem with my bike. It doesn't do it all the time, but it's not very nice when it does. it's an 09 fz6 with about 2,200 miles on the clock. Sometimes when i change from either N into 1st, or from 2nd into first...
Top