Search results

Are R compound tires strictly for track? Could I use my current commuter tires (Pilot Road 4) if they have a lot of remaining track or would you recommend getting a pair of track tires and then switching back to commuting? My only is I don't have a garage or car and this would need to be done...

It was happening before the tire replacement and thus why I thought it was bearing and got that replaed. Havent had chance to spin front wheel but do have the manual thanks. I guess I can replace the rear pads - where do you recommend buying pads from?

05 (I think that is S1) and 41K Miles. Seals as far as I know haven;t been replaced. Just so I am understanding corretly, worn out pads would make a noise even when they are not being used? I have a new mechanic and he seems on point. Wouldn't he catch the worn out pads since he replaced the...

How do I check this?

Pads were in decent shape when I last checked them a few months ago and the mechanic that replaced my bearings (and new front wheel) didn't say anything about them so I assume they were fine but would they squeak when I am not using them?

I don't have a lot of track experience (1 CS course) but interested in converting my current 05 FZ6 commuter into a dedicated track bike. I heard it is better to start on a 300 for a track bike and it's a lot cheaper (tires go through faster?) Curious what everyone's thoughts are

Noticed a weird squeaky, siren-like sound at highway speeds near the front of the bike. Thought it was the front bearing so had the replace and still hear it. Any ideas?

I am around 13K miles on my PR4s on my 05 FZ6. Rear looks pretty solid based on wear indicators but I can probably could get a few more K from the front but I think my front bearing needs replacement (started hearing squeak sounds) so debating just doing the front (PR4s are out of stock...

Scott, You've been a gem with all the (minor, fortunately) issues I've had with this bike ( which has treated me very well), at this point I think I owe you a six-pack. Let me know if you are ever in the NYC area. Fortunately, as a temp fix, leaving the kill switch on the position and not...

I do...I was always told (MSF I think), to turn off bike was to hit kill switch and then turn the key. I might try your tieing the wires together despite the instructions on the thread linked earlier - I have a fear of taking things apart since I normally fail to put them together properly...

Bringing up an old thread but just wanted to add I am on 18 months and ~12,000 miles on my PR4 with ~70% commuting in the crappy NE roads and my rear looks pretty solid (I think, no cupping and hasn't hit the wear indicator). I am guessing I could probably get another 1-2K in the front (kinda...

Thanks for pointing me to that thread! I guess in the interim I can just leave it on and hope that works. Perhaps a naive/dumb question but could this cause my bike to shut off while running at speed?

I've noticed recently my 05 FZ won't turn over when hitting the ignition switch (although the dashboard lights up). I usually just flip the engine cut off back and forth and then hit ignition and that usually does the trick but it seems to be getting worse. I know first thought is battery but...

Noticed one of the "caps" on my frame slider is missing. I am the third owner so have no idea what these are. Tried searching on Ebay but no luck. I have 2 pics, one with the blue cover and one without. Where can I order the cover for the other one. Excuse picture quality, dropped my phone...

I think I inserted one of the pads wrong the first time (one of the sides that had writing on it looked like it had been warped...hopefully didn't damage the disc too much) - second time pumping the brakes after installed that tightened things up. I want to think this is part of the process of...

Took apart one of my front brake calipers thinking I needed to replace pad (still a lot of room left) however when putting it back together felt a little loose. Didn't think anything much (thought after riding it would tighten up...I know I am dumb) but noticed brakes were choppy. So...

Conceptionally, I understand I am supposed to look at the wear indicator and see if it is flushed, but either looking at it from the front or the rear, with it turned in either direction and even lying down with a light I just can't for the life of me tell how worn it is. Which is especially...

I notice the odometer switches to a F and begins counting miles but curious how many miles I actually have before I am out of gas. 05 FZ6 if the year matters.

Sorry thought the picture I posted highlighted it but added the box to see, but it is the bracket with rubber cover that holds the exhaust up. See picture below. I am pretty sure I will have to remove exhaust to do this though based on youtube videos of people installing after market exhausts...

Finally got the part in and it is the right one. I've attached picture of where the bracket breaks/disconnect on the left. My question is I am not exactly sure how to remove in since the exhaust is in the way, seems like I have to detatch the license plate holder and remove the exhaust to get...