Search results

  1. F

    FS: 2008 Black FZ6, Excellent Condition

    Bike is sold.
  2. F

    Running FZ6 w/ No Rad and/or Coolant

    Most likely you wouldn't do any damage just running it for a few seconds with no coolant, however I would NOT recommend it. Best case is nothing bad happens, worst case is you ruin your cylinder heads. The hottest part of the engine is in the cylinder heads around the exhaust valve/port...
  3. F

    Maxed Out RPMs: Problem??

    I think connecting rod damage wouldn't be very likely unless you dumped the clutch while bouncing off the rev limiter. Valve float also shouldn't be an issue unless the engine is rather old and the valve springs have relaxed and/or the valve lash is out of adjustment. There are generally...
  4. F

    How much HP does the FZ6 have?

    Speaking of being lied to.... I was in the local dealership getting some oil the other day when I overheard a salesman trying to sell an FZ6 to some hapless unsuspecting customer. He told him it gets 50-60 mpg, it has the "exact same motor as the R6" (also not true as we know they are tuned...
  5. F

    'Paired' Tires

    I, for one, won't try to convince you. Honestly, unless you're seriously tracking/racing the bike, I don't think 'matched' pairs are going to make a world of difference on your work commute or quick trip to the supermarket. Common sense prevails.
  6. F

    Tank Help

    That shouldn't happen unless it was forcefully pulled pretty hard. You could try just shoving it back in, but then you'll probably have an unreliable fuel gauge, if at all. Hopefully no part of the terminal broke off with the wire. (The picture is a little too blurry to tell for sure, but...
  7. F

    Decal removal

    Perfect! Thanks for the picture :thumbup:
  8. F

    Decal removal

    Yep, that thread has good info about removing several other stickers on the bike. I was hoping to find some good pictures of an 07-08, prefereably black, with the large graphic decals removed from the front fairing.
  9. F

    Decal removal

    Hey all, I'm thinking about removing the 'FZ6' graphic decals from the sides of the front fairing on my black '08. Has anybody done this? Any difficulties? Do you like how it looks without the decals? Thanks!
  10. F

    Fuel Type

    The sticker on the swing arm of my '08 FZ6 says Fuel: All Gasoline 91 RON MIN. RON is an octane measuring standard used outside of the US. In the US, we use the CLC rating. According to the internet, 91 RON == 87 CLC. So you can interpret the sticker as saying 87 CLC MIN. Octane is a...
  11. F

    Need Jacket Opinions

    I have the Joe Rocket Alter Ego (linked above). You can remove the sleeves and 80% of the chest/back outer layer to reveal a mesh inner layer. I've worn it in mid 40F weather with a North Face fleece and long sleeve shirt underneath and was comfortable. I've also worn it in 90F with a short...
  12. F

    Stock Exhaust sound...

    After owning some very loud cars, I'm all about lowering the sound level as much as possible. I like how quiet the exhaust is. I always wear earplugs to cut down the wind noise. What I need is a helmet that eliminates 20+ dB of wind noise so i can go without earplugs.
  13. F

    Emblems??

    The stock 'emblems' are just stickers. You could probably order them from somewhere. I was actually thinking of removing mine, for an all-black look. Not sure how much I like the graphics.
  14. F

    Wavy Discs (Rotors)

    I tried a set of EBC pads on my car (Cavalier Z24). They do stop great, but they're much more aggressive in regards to wear than I expected. One set of pads completely chewed up my brand new rotors (EBC dimpled/slotted rotors). Also, the pads wore out much faster than I expected. I...
  15. F

    Utube Video FZ6 Nose Wheelie & Crash

    It's definitely not an FZ6. If you pause it when it goes vertical, you can see that it doesn't have the passenger grab bars. I think it might actually be a CBR. The headlights look too angled for an R6.
  16. F

    I hate torque wrenches! ..help again

    You can use a reducer with a torque wrench, no problem. A good technique with a reducer, extension, or even a deep-wall socket is to stabilize the turning part of the wrench (where the socket attaches) with one hand so that the force you apply with the other hand is fully directed in the plane...
  17. F

    2007 FZ6 vs. 2008 FZ6

    Besides the colors, the '08s have a flat black accent piece around the headlights. Mine is an '08, black. The color was the final thing to sell me on the bike. There's a little bit of metallic in the black.
  18. F

    FZ6 v FZ1

    In order of importance: 1. Insurance 2. Cost of the bike 3. It's my first motorcycle and 1000CC seemed like a bad idea for a newbie
  19. F

    Zox helmets?

    I tried on an Icon, HJC, and a Joe Rocket when I bought my bike. The Joe Rocket was way more comfortable than the others, and I think it looks better too. Feels like it was constructed specifically for my head. It was more expensive than the others, but I figured this was one area not to...
Top