Search results

It started almost two months ago when at a spur of the moment; I bought a R6 rear shock off eBay for $24.00. After reading jesfz6r’s post on Sportbikes.Net, I was skeptical about retrofitting the R6 rear shock, but I decided to go ahead with the modification anyhow taking cognizance of...

Nice find Andz :thumbup: FZ6-ZN

A couple of mates and I took a ride down to the Hole in the Wall, Coffee Bay on the Wild Coast of the Transkei, South Africa. Awesome weekend FZ6-ZN

Sorry to hear about your misfortune, I hope you have a full recovery... FZ6-ZN

Re: sorry guys Sorry to hear about your misfortune, I hope you have a full recovery. FZ6-RIP :Sport: Nice Kawasaki! Ride safe… FZ6-ZN

Since it’s always warm where I live, except for the occasional cold front that passes in a day of two, I always wear a Alpinestars T-Monterey Air-Flo Jacket, Alpinestars 365 Gore-Tex Gloves, Armour gear keviar riding pants, shoei XR1000 helmet and Thor 50/50 riding boots. FZ6-ZN

They are all 98hp, except they limit the engine on some models to make them 78hp. There is just a throttle stop that you have to bend away and then you will have all hp again. You don't need to remove it FZ6-ZN

Welcome :welcome: Congrats on the new bike... Black is beautiful, but we all know blue is faster... FZ6-ZN

Happy Birthday Wolfman... FZ6-ZN

Death wish; plain stupidity… FZ6-ZN

JIS screws are 58 degrees and have a blunt point, while the Phillips screws have an angle of 55 degrees and are more pointed at the tip. Since you cannot conveniently buy a JIS screwdriver, one modification that can be made to a Phillips screwdriver is to grind off the tip of the blade...

Still running the db killers, because I dyno tuned with them in. You ought to be ok with PCIII and custom map FZ6-ZN

The deal with the two screws on the front brake reservoir cap is that they are a different type of Phillips known as Japanese Industrial Standard aka "JIS". A JIS screw has a dot on its head to identify it as such. Japanese and other precision-made Phillips' head screws require screwdrivers...

When a Phillips is not a Phillips! Always use the right tool for the job The deal with the two screws on the front brake reservoir cap is that they are a different type of Phillips known as Japanese Industrial Standard aka "JIS". A JIS screw has a dot on its head to identify it as such...

I cut out the cat on my 06 when I fitted TB’s and thereafter my bike refused to idle. I had to fit db killers to get back pressure. I wouldn’t recommend removing the cat unless you intend fitting a power commander or juice box. The S2's don’t seem to have this problem, possibly because...

Thanks Dennis, I'm 9000 Miles away from you... FZ6-ZN

2006 ~ just over 6000km FZ6-ZN

RIP brother

Limiters prevent damage to an engine by interrupting the power that is distributed to the spark plugs, this prevents the engine from operating above a pre-determined RPM level known as the red-line. FZ6-ZN

To be quite honest, I think that the FZ6 TB Y pipe is badly designed. The almost 90 deg. bend to the LHS can restricts the exhaust flow to such an extent that most of the gases are exhausted on the RHS. I often laugh at this when I clean my bike as I believe that the FZ6 TB system is far from a...