Search results

Yes i disconnected the ecu yellow/black stripe has no conitnuity it shows OL Im using sa buzzer multimeter to check for continuity I manually tested the relay activated the trigger with 12v on the two pins, its clicking check for continuity its all good,

Red/yellow wire should have a constant 12v supply am i right? Yellow/black wire is definitely the problem it doesn't have continuity from ecu to relay socket, Thank you!

Good day! Ive got no headlight when engine is running check list Head light socket Wires to the headlight black/green/yellow Relay Fuse its all good Now the relay socket has 4 wires Does Yellow/black stripe goes into ECU? Yellow/black stripe from Ecu socket doesnt have continuity to relay...

Update! I fix all the high tension wire and secured it to the cap and ignition coils, error is gone after i repaired and cleaned body harness She idles great and smooth revving Lucky me i dont have to buy a new ECU I'm still waiting for my new radiator, its pitted inside out full of pinholes...

Im planning on replacing the caps ive inspected it and it was damaged cracked covered with rubber, is there any replacement sparkplug cap and high tension wire i can buy? My high tension wires is to short now if i trim it off

Hey everyone! My bike runs now but it shows error code 33. Do bad sparkplug caps caused that error code? Btw error code is gone when i revved up the engine, but when it sit at idle it shows. Ive tested the coils and it was within spec, but one sparkplug cap was out of spec 22k ohms but its...

Thank you everyone!

Hello good day! What temperature do our radiator fan starts working, i mean how many bars I bought the bike with its own switch to radiator fan, ive rewired it to stock harness to have an automatic fan, but cant seem to make it work The fan it self is running when i put dirext power to it

Good day! Im looking for wiring schematics particularly for radiator fan, the previous owner of my bike installed a switch for the fan motor , now im trying to put it back to factory wiring Or maybe some pointers from you guys Thank you!

https://youtube.com/shorts/ZGRz986C9k8?feature=share

I'll check it later today, i just need to order some parts while im working on other parts of the bike, so that when i need to tackle the job i have all the parts i need Thank you!

Yeah im gonna leave it as is. It works i've tried to pour some gasoline in the throttle body just to see if its gonna run. She runs for a brief moment which gave me chills and excitement Still waiting for my tank to be cleaned Thank you

I Dont really know the look of the pads as it is still installed, does this one work? Sorry for asking too much

Hello brothers, is the brake pads from r6 or fz6 s2 will fit to my bike 2004 fz6n And also im rebuilding my brake master, front and rear calipers, is there a rebuild kit from other bikes that will fit mine? Parts here in the philippines is hard to come by, i cant find anywhere here seat lock...

It seems to be junction point for all black wires, ive found 2 of them

Hey ya'll ive cleaned all connectors and checked continuity what ive found is the black wires attached to small black box Ive got it sorted now, i will probably need help later after ive finished cleaning my fuel tank Thank you!

This is one of the culprit, Ive cleaned it all connectors and also check for contunuity, I think everything is sorted now im still cleaning my fuel tank, and im waiting for the chemical ive ordered fuel tank sealer Thank tou very much!

Iam having the same problem like josh, no power to red/blue tracer wire I have spark but no power to the pump

Good day Ive recently acquired the bike, its not running for 4years now, the first thing i did was poured oil in the cylinders and clean the injectors,the i move over to the tank, there was no fuel pump rotor inside. now ive put a used battery to crank it over, and it works it has spark and is...