Search results

Seems to only be low beam. I did access that plug when I installed the automatic indicator cancelling system. It all looked good then, so fingers crossed, hopefully they didnt upset anything in there when they did the head stem bearings. Its been fine for a while since I did the running repair...

I rode home at dusk tonight and as I parked in the garage, I noticed as I maneuvered the bike a little bit of dimming of the headlight as I wiggled the steering. I think I have a little bit of a short or a dodgy connector. The headlight plug had failed a while back and I ended up putting three...

So I picked up the "Naked Wasp" last Friday morning and it was a delight to be back on two wheels again. I have been riding a little gingerly not venturing too far just to be sure it doesn't fail again, but it seems to be like the bike of old. While it was in I had new head bearings, fresh fork...

Hey Ben, I'm down in Melbourne and its dry for now but usually after rain I'll get home hose off the road grit and grime then chamois the bike dry. I wax the chain every 500 kms. I have one trip meter set for petrol so I know when its getting close and reset it after each fuel up, the other for...

Well I dont have a hammer....

I spoke with the service guys at Yam. today, they said the second hand CPS was still in the original bikes cover when they got it and that it had obviously "had a whack". But when they installed it everything ran so assumed it was good. As we all know "assume" makes an ass of u and me. I might...

Hi Clif, waiting on the new CPS to arrive from Japan. I ran the idea of loose cam chain past the techs and they reckon for it to have been that loose I would have heard it long ago and they would have been advising me there was an issue earlier on. I might just be real unlucky in that...

Hey Kenny, as I have a shoei shaped noggin, I have been a long term user except for a few Lazers in my 20's (and in the early 90's, one KBC coz it fit well, I liked the colour and $$ were short) I'll be interested in what you think after a little while. I tried on an Arai a few years back and...

hey folks anyone had much experience with the above and the crankshaft postion sensor Mine failed and left me stranded a week back- got the bike to the service crew and they fitted a second hand cps and I hoped all would be good until the new one arrived from japan in a months time. Took the...

be careful of the latte set with sombreros

I hate camo wraps

yep a buzz cut is ace, I havn't used a comb for over 30 years now, maybe thats why I am so confused about roundy rollers-o_O

Hey Scott I thought the roundy rollers were for putting a nice curl in your "do" ha ha

found this in my files for anyone interested

HJi Denis, hope youre keeping well, I was Mod for FZ6 Mods and am happy to still fill that role. I think I may have been mod for Essential/interesting reading but that hasn't had much traffic- I still log in daily pretty much even if I don't comment so keep me there if that helps cheers Ade

btw nice looking ride!

have a look at webike (japan) https://japan.webike.net/ I have found them pretty good with abroad range of "stuff"

yes! Many Happies

Hey Chris, I got the plugs from Eastern Beaver and the crimp tool as well. Took plenty of pics of the original plugs to be sure I had all the wire colour codes right. Followed your lead and made the interconnecting wires on the inserted bit of loom about twice as long as yours and I reckon...

If you have a look at the post : https://www.600riders.com/threads/fitting-smart-turn-system-indicator-shut-off.59748/ Chris put in some excellent pics. and his advice about the length of wires interconnecting the the two plugs is really helpful. His were about 2 inches, I doubled it to about...