Recent content by Tylercriss502

Can ypu send me a link i cant find it

I have replaced every harness on the bike and staryer cutoff relay and lean angle sensor with the same problems please help

When i hook the test lamp up from battery neg to blue/yellow at relay with key on the fuel pump comes on but stays on doesnt "prime" just stays on

When i hook test lamp from battery to blue/yellow at relay with key off it test lights lights up and the relay clicks but when i cut the key on the light goes out

When i hook 12v ffrom battery to blue/yellow at relay via a test lamp with the key off the relay clicks and lamp lights. When i turn i key on nothing.

I have a pdf manual for it. And for the wiring harness the exhaust burnt the harness by the starter cutoff relay and instead of going thru that cluster f*** and traxing wires i bought another main harness

Yes its in an fz6 chassis. Bought the bike and previous owner loat the kwy tried to hot wire it and blew the starter utoff relay. Replaced that and its ran fine for a couple of months till this last incident. How do o test the lean angle and kickstNd? I know the bike s getting spark and turning...

Injecrors are not firing so it will not run if fuel pump is wired remotely. Will crank if starting fluid is shot in throttle bodies but dies.instantly bc of no fuel

I have continuity from the relayy and ecu at the blue/yellow wire. But when i hook a test light up from battery to blue/yellow at relay no light???

New to fuel injected bikes but 40 years exp on carbed jap bikes have all tools necessary to get the job done. And yes replaced the main harness

All fuses are good also that are in the fuse pod on the right side under seat

I have a 2004 fz6 was riding it pretty hard about a week ago and it suddenly died. Got to looking at it and the fuel pump wouldnt kick on. So i cut the wires to the fuel pump connector to test the pump by hooking 12v to it and it works. So i thought that maybe the starter cutoff relay was bad...

Hi all fairly new to the site thanks to this site i got my fz6 running with a 56$ relay. Anyways my question is does anyone have any insight on witing an acrebis cyclops headlight to my 04 fz6? I have the original headlight harness from the fz6 and the harness to the cylops headlight kit looks...

I got rhe fz6 running. Thanks to all the people that suggested the starting circut cut off relay. I replaced it and it fired right up. But i unhooked the battery before i plugeed the relay in anyways my arm was grounded out on the forks and it was shocking me. Is there a commom short on these...

i have asked the guy what happened to to the cluster and he said he has one but its not for that bike but any will work?