A fork rebuild question if I may gents...?
I decided to change the seals on my forks and when I took them apart I noticed that the top bush on each fork is different and was wondering if I should be concerned....?
That's a great point, if it has done it once it is probably likely to do it again, especially as there was nothing near it to cause it to rub and chafe...
hi guys, I noticed the other day whilst cleaning my bike that the fork dust seal seems to be perishing, although there doesnt seem to be any oil leakage, so after a little research I decided to order the main seal and the dust seal and am gunna replace them on both forks.
My question is what...
Hi guys yesterday I noticed the bike was running a little different to normal, mainly it seemed "grumbly" so thought I would put the carb tune on and check the throttle body balance.
When I attached it and started the engine up all but one of the gauges were working and balanced with one...
thanks for the replies guys.
I think I need to look at making something for the bike to sit on where the centre stand would be...
On the note of things to remove, I only need to remove the cat don't I and not the headers?
Hi guys I have a 2004 S1 FZ6N and on the recent MOT test they advised that there was some slight lateral play in the swinging arm bushes, so I figured I am going to plan on replacing the chain and sprockets soon so thought it might be a good opportunity to do the swinging arm bearings too.
My...
hi guys, thanks for the replies.
I probably need to clarify a little more....it appears that its the axle that is stuck not the adjusters.
I loosened the axle nut right off and the adjuster nuts off a little, covered the axle nut with a block of wood and bashed it with a big hammer.....the axle...
hi guys, apologies if this seems like a daft post, but I could do with a little help and clarification if possible?
today I thought I would lube my chain and once on the paddock stand noticed that the chain was a little on the slack side so I decided I would adjust it.
so I undid the large...
I emailed them yesterday and this is their reply....
Dear Stephen,
thank you so much for reaching to us and for your interest to our production!
Yes, the side mounted exhaust system for your bike in subject is available and in this moment we offer the titanium material at the same price of...
Hi guys, I have just come across this company based in Italy who have pictures on there of an FZ6 with a side mounted exhaust....
Home - www.massmoto.com
I guess my question is, is there an alternative to buying from here?
Will the R6 exhaust fit the FZ6 because I understand the engine and...
Hi Rich, do you have a picture of the ones you are wanting?
I work for a sign making company in West Yorkshire and may be able to re-create some for you
Hi, thanks for the detailed reply.
I do have one of those smoked fly screens on already and just fancied if simple and cheap enough to put a bikini fairing on.