Recent content by S107

Looking for alternator that will fit an 06. Please PM or email [email protected] Thanks guys.

Thanks moto, i found a part out on this forum and will hopefully grab the pump for an amazing price. Just working out the shipping details. I'm SO excited!

Fuel Pump without tank?

Bike stalls after a few mins 09 fuel pump in 06? Today i tore the bike apart cleaning and checking every electrical connector I could find. Battery has been on charge all day and Im having the same issue. Now im almost certain its a fuel problem. Im going to throw a hail mary and swap the fuel...

Lol, after i pulled over I looked down and seen that mileage, freaked me out all night.

Bike Stalling after 2 mins New battery all connections and hoses checked. 06 FZ6 with 66,666 miles after first stall. So the bike is constantly stalling after about 2mins. Does it in Nuetral and first at stops. The bike primes up as normal but struggles until I open throttle. Once I let go the...

I've bypassed the kill switch last year. I did notice wirebrunning into frame on throttle side are kinked. Time to tear down and look for loose or damaged wiring.

So the problem went away after this post and was fine for a few weeks. 2 days ago I ride out about a mile and it choked and turned off in 1st at a stop light. Pulled off the road and started it up. The bike was struggling to turn on but I finally got it. It would shut down if i wasnt on the...

Valves were done at 30k. Going to pull battery today and hope that's the problem. Thanks for all the help guys.

So bike starts up fine to op temp. I take my 25 mile commute on the freeway. Get off freeway and come to a stop light. Tach starts dimming and bike starts to choke lightly. The idle is ok at 1260/1320. This happens in 1st and neutral. Any ideas? 06 with 65k mod to streetfighter. I do have some...

sweet thanks guys. :rockon:

I'll have to do it over again tomorrow. Bikes ok to ride still right? I mean i'll just have the mushy brakes. I gotta take a 20mi trip to work tonight. Wont be able to work on it until tomorrow. Thanks again.

It was a PDF file I found on the forum. It said: 9. With one bleed screw loose, slowly press brake lever all the way and hold, tighten the bleed screw and slowly release the brake lever. 10. Repeat ste p 9 until fluid runs out of bleed screw REMEBER to keep the master cylinder reservoir...

I think I F#CKED up, I just changed my rear pads. Test ride didnt notice any real difference. Pads went on smooth and bolted back up. Now I bled the rear MC like this 1. Rear hose to bleeder valve 2. Loosen valve 3. Slowly press rear brake pedal all the way down 4. tighten valve 5. Slowly...

thank you sir, had to give it a little wiggle, i got it back down. Now its time to bleed, YAY!!!!!!!!!!!!!!!!! :spank: