Thanks moto, i found a part out on this forum and will hopefully grab the pump for an amazing price. Just working out the shipping details. I'm SO excited!
Bike stalls after a few mins 09 fuel pump in 06?
Today i tore the bike apart cleaning and checking every electrical connector I could find. Battery has been on charge all day and Im having the same issue. Now im almost certain its a fuel problem. Im going to throw a hail mary and swap the fuel...
Bike Stalling after 2 mins
New battery all connections and hoses checked. 06 FZ6 with 66,666 miles after first stall. So the bike is constantly stalling after about 2mins. Does it in Nuetral and first at stops. The bike primes up as normal but struggles until I open throttle. Once I let go the...
I've bypassed the kill switch last year. I did notice wirebrunning into frame on throttle side are kinked. Time to tear down and look for loose or damaged wiring.
So the problem went away after this post and was fine for a few weeks. 2 days ago I ride out about a mile and it choked and turned off in 1st at a stop light. Pulled off the road and started it up. The bike was struggling to turn on but I finally got it. It would shut down if i wasnt on the...
So bike starts up fine to op temp. I take my 25 mile commute on the freeway. Get off freeway and come to a stop light. Tach starts dimming and bike starts to choke lightly. The idle is ok at 1260/1320. This happens in 1st and neutral. Any ideas? 06 with 65k mod to streetfighter. I do have some...
I'll have to do it over again tomorrow. Bikes ok to ride still right? I mean i'll just have the mushy brakes. I gotta take a 20mi trip to work tonight. Wont be able to work on it until tomorrow. Thanks again.
It was a PDF file I found on the forum. It said:
9. With one bleed screw loose, slowly press brake lever all the way and hold, tighten the bleed
screw and slowly release the brake lever.
10. Repeat ste p 9 until fluid runs out of bleed screw REMEBER to keep the master cylinder
reservoir...
I think I F#CKED up, I just changed my rear pads. Test ride didnt notice any real difference. Pads went on smooth and bolted back up. Now I bled the rear MC like this
1. Rear hose to bleeder valve
2. Loosen valve
3. Slowly press rear brake pedal all the way down
4. tighten valve
5. Slowly...
Cant get it back down to put in new pads. Opened the bleeder and pressing down on it. Wont budge. Need help, thanks guys.
Does the rear MC have to be open?
It was the kill switch. Been riding the past week with no problems. Last night It cuts off again and wont start for over an hour. Im stuck at a gas station and start pulling things apart. I hear a clicking from near the fuel pump relay. I start moving the Switch housing and keep hearing the...
Havent tried the kill switch loop yet. Havent really had a chance to work on the bike lately, socal has been getting slammed with rain. Anyway I brought the bike out to work today with no problem. I was doing street / freeway riding. I will clean / grease all connections i can find tomorrow. Can...
I can try tomorrow. When I opened it up today i seen the wires solderd in. So I would just take the two wires and splice them in together? Also I was reading that the inside of the fuel relay can go bad. I pulled it today but its sealed closed. Anyway to test the relay at a dealership?
I do hear the buzz before i start the bike up. I took it out a few days ago for a 60 mil ride with no problem. The next day after that 3-4 mins after I get going on the road the engine cuts power for a split second but doesnt cut out. It did that 3 times before I went back home and called it a...