Recent content by aid-90

I used to be a total hardgainer. 6ft 4 @ 200ibs. used to do the usual bodybuilding type work out. used to have very bad shoulder pains while benching. max deadlift was like 130 kg which I thought was impressive. squat was 120 kg. bench bout 85kg. Started training with powerlifters. adopted...

Problem is solved thankfully! A day full of driving, sunny weather and 2 tanks of fuel later I am a happy camper :rockon: :rockon:

I have the very same bike that I bought 1.5yrs ago with the same miles :BLAA: Great bike as was already mentioned check if the TPS recall was done. As for valve clearances I think the specified intervals is 24k miles :rockon:

Just after by passing the kill switch, the switch assembly was a pain to put back together! But thankfully the cutting out problem is solved :D

Well done Neil! I am going to perform this today fingers crossed it works :thumbup:

Should I take the killswitch assembly apart... check the connections? spray with wd40? how would i go about bypassing the switch? Thanks :thumbup:

I am starting to have the same issue. my bike is a 2004 and the recall was done. have a receipt from the previous owner. I could be driving and the bike would go dead for a split second and then shoot back to life, which is quite worrying :eek: Would the tps have failed? never thought of...

Sounds the very same as my slip ons without baffle. louder than my friends zx9 with beowolf exhaust with no baffle :Flip: :Flip:

Have you bought the slip on system? I will be selling my exhaust system on my 04 fz6. i year old. glorious sound out of it :thumbup:

Hey neil how are ya? Was servicing the bike today took off the tank, cleaned air filter disconnected the battery, but unfortunately that didnt reset the speedo. I must read up on ch 4 of the haynes manual :Flash:

I have a haynes manual. is it a case of disconnecting and checking for dirt or water?? Thanks :)

Thanks Neil! Pretty annoying! Hope its an easy fix :thumbup: Aid

Reset Speedo?? HELP Hi my speedo has been giving incorrect readings for the last week. it happened after I washed it with a pressure hose. I was being careful not to get the electrics wet. when stationary the speedo shows like 12 mph. when doing speeds of 70-80mph I know it is showing a much...

In your first pic, the cylindrical shaped thing with the nut under the down pipes is the oil cooler?? Do you ever need to interfere/ adjust it? I have only changed the oil + filter as per usual

I recently had fork seals replaced along with brake fluid. bike never suffered collision. had the bike nearly 2 years daily use. Will remove calipers, see if wheel spins freely and go the brake cleaner route! thanks