I have a set of asv levers long. Only been used on 4 rides. Fits the fz6 s2 but may fit older models.
£120 no offers.
Free uk delivery
Sent from my SM-G973F using Tapatalk
The only real difference I can see is some of the metal pipes on the radiator are at a different angle.
I think it's worth a try for £50. If it don't fit I'll just sell it on.
Sent from my SM-G935F using Tapatalk
Anyone know if the old fz6 04 -07 radiator and fan would be able to fit on to the fz6 s2 model.
My fan has died and I can't find a second hand one but i can buy the old radiator and fan for £50 off eBay.
Sent from my SM-G935F using Tapatalk
I'll write down how I done it.
Filed down the bolt so it was flush. ( cordless drill with a sanding attachment worked well)
Hole punched the middle
Extra long 3mm hss drill bit then extra long hss 5mm drill bit ( you could try a extractor tool at this point ) then finally a extra long hss...
Anyone ever had this bolt seize up and snap off?
Mine snapped off while trying to remove it. I tried wd40 and blowtorch but it wouldn't move.
So then tried a extract tool which didn't work so ended up drilling it out and now left with a big hole.
Would this fail an mot? Do you think it's...
Time for a tyre change.
Currently on Avon ultra 2 and had no problems with them and done 6k. Has about 2m left on the rear and the front is very close to the limit.
I've been offered a set of bt016 pros fully fitted for £190 just wondering if any one is using them and could give some...
Anybody know where I can get the yamaha spark plug tool from in the UK or Has anyone used a different one.
The bike didn't come with the tool kit.
Went to do it today and what I thought would work didn't. I had a spark plug socket connected to a bendi socket which is slightly to wide and as...
Anybody know if this spark plug will be OK to use. As you can see the ground electrode has a small chip from where I was using the gap tool.
Sent from my SM-G935F using Tapatalk
I didn't have the bike before the tyre change so don't know if it was doing it or not. Might have to book it in for a check up
Sent from my LG-D855 using Tapatalk
Cheers guys. Its a 2009 with 15k. The dealer put new tyres on before I brought it but I wouldn't expect them to mess something so simple up.
Sent from my LG-D855 using Tapatalk
Just checked my head bearings and they are all good. So I started to shake the front tyre and started to touch stuff near by to see if I could locate the noise.
Just about to give up, but before I did I squeezed the front brake and the noise stopped. The noise is coming from the calipers...
Hi guys I have a small knocking noise coming from the front wheel. If i go over a bump you can hear it and also when the bike is on the centre stand and you sort of wobble the wheel you can hear it. There is no play in the forks.
Is it normal or a sign that my bearings are on its way out...