beatle
Junior Member
I picked up a set of 2wheels LED signals, 3 wire turn signal adapters, and blinker genies for the front. I also picked up an electric flasher relay, but that works fine.
Anyway, it seemed pretty straightforward to hook them up, especially after reading this thread: http://www.600riders.com/forum/fz6-electrical/50826-wiring-help-please.html. The 3-wire adapter even matched the blinker genie colors, so I figured I couldn't mess it up. However, when I turned the key to "on," I get nothing. Signal right, nothing. The signal works fine when I hook it directly to a battery on its own, so something must be amiss with my wiring or the genie. I'm currently working on the "passenger side" of the bike, FWIW. Any ideas?
Anyway, it seemed pretty straightforward to hook them up, especially after reading this thread: http://www.600riders.com/forum/fz6-electrical/50826-wiring-help-please.html. The 3-wire adapter even matched the blinker genie colors, so I figured I couldn't mess it up. However, when I turned the key to "on," I get nothing. Signal right, nothing. The signal works fine when I hook it directly to a battery on its own, so something must be amiss with my wiring or the genie. I'm currently working on the "passenger side" of the bike, FWIW. Any ideas?