-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
Need Help Yamaha Fz6 error 1 code
- Thread starter Toxri
- Start date
- Joined
- May 8, 2008
- Messages
- 15,356
- Reaction score
- 1,605
- Points
- 113
- Location
- San Diego, Ca.
Welcome to our great forum!
Many times it can be an issue with battery voltage. Check that your connectors to the battery terminals are clean and tight.
If you have a digital volt meter, check your battery voltage during starting and charging. A healthy battery should show 12.8 vdc. while there is nothing using it. You should be above 10 vdc. while cranking to start. you should see above 13.5 vdc. with the engine above 2000 rpm.
600riders.com
www.600riders.com
Many times it can be an issue with battery voltage. Check that your connectors to the battery terminals are clean and tight.
If you have a digital volt meter, check your battery voltage during starting and charging. A healthy battery should show 12.8 vdc. while there is nothing using it. You should be above 10 vdc. while cranking to start. you should see above 13.5 vdc. with the engine above 2000 rpm.
Er 1 code
The story: I removed all fairings and tank from my fz6 2005 to get them painted and after a month when I assembled them back to the bike and tried to ignite the bike the error 1 appeared on the screen and the bike wouldn't start. I changed the battery and the bike worked properly but the error...
Electrical Problems (Er-1)
Hello everyone! Fairly new FZ6 owner here who just purchased the bike back in August. I have been having a rather problem free run up until a few weeks ago when the bike refused to start after sitting in the rain for a day or two. The bike displays "Er-1" when trying to start it up. The bike...
Toxri
New Member
Thanks i will try and hope i will know whats the problem, and solve it, i will post results.Welcome to our great forum!
Many times it can be an issue with battery voltage. Check that your connectors to the battery terminals are clean and tight.
If you have a digital volt meter, check your battery voltage during starting and charging. A healthy battery should show 12.8 vdc. while there is nothing using it. You should be above 10 vdc. while cranking to start. you should see above 13.5 vdc. with the engine above 2000 rpm.
Er 1 code
The story: I removed all fairings and tank from my fz6 2005 to get them painted and after a month when I assembled them back to the bike and tried to ignite the bike the error 1 appeared on the screen and the bike wouldn't start. I changed the battery and the bike worked properly but the error...
Electrical Problems (Er-1)
Hello everyone! Fairly new FZ6 owner here who just purchased the bike back in August. I have been having a rather problem free run up until a few weeks ago when the bike refused to start after sitting in the rain for a day or two. The bike displays "Er-1" when trying to start it up. The bike...
Toxri
New Member
I resolve the problem, i have problem with the wiers, i rewierd and fix the problem.
For my problem, someone has changed position wiers in the connector.
For my problem, someone has changed position wiers in the connector.
Similar threads
