aaronshum
Junior Member
Delivery took longer than expected, but Watsen's had a legitimate excuse (kinda) as they were moving shop. When the package arrived, it was well packed. Bought from them directly here: http://www.watsendesign.com/Yamaha_Products/FZ1/FZ1.htm
I ordered the LED signal for FZ1/08+ FZ6 and the optional resistor to allow half powered running light. Thought about taking more photos but it's pretty much similar to the one posted by Boneman.
The signals came in a good setup with exact connector, no splicing required!
Removal of the stock signal was a breeze. I used tie wraps and a tie wrap stick-on anchor to house the extra cable and resistor inside the front fairing.
Pics below for the final product!
Overall, quite happy with the turnout, signals are VERY bright. Delivery took longer than expected (6 weeks, though they did mention 4-5 weeks). Cost is a bit high but I trust these to be very good quality product and not eBay cheapos.
Would probably go back to Watsen Designs for more flushies on my next bike!
I ordered the LED signal for FZ1/08+ FZ6 and the optional resistor to allow half powered running light. Thought about taking more photos but it's pretty much similar to the one posted by Boneman.
The signals came in a good setup with exact connector, no splicing required!
Removal of the stock signal was a breeze. I used tie wraps and a tie wrap stick-on anchor to house the extra cable and resistor inside the front fairing.
Pics below for the final product!
Overall, quite happy with the turnout, signals are VERY bright. Delivery took longer than expected (6 weeks, though they did mention 4-5 weeks). Cost is a bit high but I trust these to be very good quality product and not eBay cheapos.
Would probably go back to Watsen Designs for more flushies on my next bike!
Last edited:
