viviifz6
Winter...
Ok, first off please bare with me, as this is my first new, large post from my HTC evo. This may have been done, but I haven't seen anything about it. I did a very non invasive dual headlight mod. Pretty simple simple, it required about a1 ft or 30cm section of wire, I used 12 gauge and 2 typical connectors. You can follow the pics, but I modified one of the connectors a little bit then you just insert them into the top slot on your left headlight then insert the other side into the empty alot on the right headlight. It isreal straight forward and works great.I'll label pics tonight when I get to my computer. And apparently add them too, my phone is being temperamental
edit: Here are the pics, labeled. I have only had a chance to run the bike for about 20 minutes had no problems yet, but please let me know if you guys think there is a major malfunction somewhere, and remember, this is just a prototype, so im going to perfect it!
edit: Here are the pics, labeled. I have only had a chance to run the bike for about 20 minutes had no problems yet, but please let me know if you guys think there is a major malfunction somewhere, and remember, this is just a prototype, so im going to perfect it!
Last edited: