Unplugging Ignition and start switch

[Cloned]

I'm trying to remove my start switch housing and ignition switch so I need to unplug them. The thing is, I can't find where to unplug these. The wires run into the frame, and I've tried to trace them but simply can't find where they plug. The haynes manual isn't any help here.

Anyone know which connectors I need to unplug? I'm having a hard time tracing them.

 

[MaxRyan]

Mine were on the left side, i had to remove the airbox to get to them. Once i had it removed then i pulled back and forth on the wires to see which ones moved, for the ignition there were two, a white and a red plug.

(this is for us/can bikes, i think the markets with the immobilizer would be different)

 

[Cloned]

Ok, so I do have to remove the airbox. I was hoping I wouldn't have to do that. I guess it's off tomorrow to find a long allen to take that off.