I have a Scorpion XDR 3/4 length coat with matching pants,they have a zipper in back to join them together. :thumbup:
They did their job of protecting me rather well when I high-sided in the rain at 30 after hitting a big patch of oil while changing lanes that was caused by a car running over a quart of oil that had bounced out of a lawn service trailer. :spank:
The gear came with two layers that zip in,a waterproof layer and a thermal layer.
You can't zip the thermal layer in without the rain layer so if it's cool and dry you still have to put the rain layer in if you want it to fit correctly.
It can be raining so hard most riders are under an overpass and I'm still riding,dry inside my gear!:cheer:
The problem is the outer layer is soaked.
I mean SOAKED! And Heavy!
If I go into a store I leave a puddle under me that looks like I didn't make it to the john in time.

Anything in the pockets of the coat is going to be wet,,,I carry zip-lock bags for the things that I want to keep dry.
You better have your rain layer in before it's starts to rain as you have to remove your gear,including your boots,at least mine,
(Red Wing Loggers) as they wont go down the leg. :rockon:
It's no fun putting the liners in when the outer is wet.
IMHO, I think an over the gear type would be so much better!
Rich