zixaq
Elite Member
So I stupidly thought this would be a straightforward swap. Silly me.
I just discovered that the recommended springs from RT are 0.25" shorter than the OEM spring, so I need some kind of collar/bushing/spacer/whatever to make up a half inch of space. Has anyone done this recently that has a source for something appropriate to use for that spacer? I'm nervous cobbling something together given the forces from that spring.
FYI:
SK SPRING 7.0 x 2.25" 16.1kg SESP 702250900
Stock spring is 7.25" according to an old thread on this forum.
I just discovered that the recommended springs from RT are 0.25" shorter than the OEM spring, so I need some kind of collar/bushing/spacer/whatever to make up a half inch of space. Has anyone done this recently that has a source for something appropriate to use for that spacer? I'm nervous cobbling something together given the forces from that spring.
FYI:
SK SPRING 7.0 x 2.25" 16.1kg SESP 702250900
Stock spring is 7.25" according to an old thread on this forum.
Last edited: