Need help ASAP

[Timbostang]

Hey guys! I'm in the process of doing the vs02 naked conversion on my bike and I'm almost finished. I wanted to check my light connections so I went to start the bike and I'm not getting any fuel pump or starter. All I'm getting is taillights. What did I do wrong. That and I'm stuck at the shop about 50 miles from home.

HELP!!!

 

[Marthy]

Hey guys! I'm in the process of doing the vs02 naked conversion on my bike and I'm almost finished. I wanted to check my light connections so I went to start the bike and I'm not getting any fuel pump or starter. All I'm getting is taillights. What did I do wrong. That and I'm stuck at the shop about 50 miles from home.

HELP!!!

I'll check the fuse first... maybe you blow one up in the process? Kill Switch?

 

[Timbostang]

Kill switch is on. Gauge comes on and shows no codes. Is there a tip over circuit that could have been disturbed?

 

[Marthy]

Kill switch is on. Gauge comes on and shows no codes. Is there a tip over circuit that could have been disturbed?

On my 6R there's a fuse box right under the seat... kind of next to the battery. Wish i can help more...

 

[ChevyFazer]

It's not in gear is it?

 

[Timbostang]

Nope. Not in gear. I checked the 2 30 amp fuses at the starter relay and they are good. This makes me think there is some kind of sensor that got tripped when I swapped out lights.

 

[Timbostang]

Wow! I'm really at a loss here. I've checked everything I know to check. I'm about to jumper the shutoff switch to see if it or the wires could be the culprit.

 

[ChevyFazer]

Maybe try to unhook the battery for a min or so and see if it resets anything?

 

[Timbostang]

Thanks for the input guys. I finally figured it out after I almost had the bike completely disassembled. Ends up that I must have tugged on the kill switch wires and it disconnected at the plug inside the frame rail. It is a real pain in the neck to get to.

Now to finish buttoning it up and go for a test ride!!!