LeoVince Install...and a headache..

[jpgibson]

Got my LV's from Italty to Oz in 3 days! Not the 21 they advised. Install went pretty well, then I decided to remove the dB killers..............
To cut a long story short, the install took me about 2 hours, then I spent 3 hours trying to insert two grub screws.
I need to drill out a bit of metal as ( obviously) the inserts are semi pressed in from factory.
Anyhoo, if I'd thought to get out my mirror to aid lining up the holes, the reinsertion would have taken all of 10 mins!!
Sounds good, much too loud with them out IMO.
Not really any weight saving though.
I cant believe what great value they are: 600AUD landed, this included the cat eliminator pipe. When I had a Ducati Hypermotard, the LV pipes and cat elim and new ECU ( 300 on eBay) cost me more than 2500AUD.
Happy, but 600 is still a lot for more (quality) noise!!

 

[OZXJR]

I had these on my FZ, shouldnt have to drill anything

 

[greg]

to get the baffles in and out just requires a firm grip and some jiggling from side to side. It should a minute or two to replace each one, the screw doesn't need to be perfectly lined up, it will pull the baffle in place as you tighten it (it obviously needs to be close though).

 

[motojoe122]

I have these too. Give them a few hours and the inserts will come right out.