Qwibby
Scarlet
I didn't take any pics during install, there was an amazing install thread here posted by someone else.
Link:
Leo Vince Install Step By Step
I used this link above, however it gets kind of vague towards the end of the install before reassembly.
First thoughts: Quality was amazing, well packaged and every bag was labeled. I was disappointed at the install instructions, they were more like a book of toilet paper, it basically said disassemble your bike fit hardware and check after a few hundred miles, no, seriously thats it.
Install is pretty straight forward, dis-assembly was easy, everything went together nicely. However I came to a shocking discovery that either I was not shipped all of the hardware or you really have to patch together the cans/rear fender hanger/ and support beams with the factory hardware and leo hardware. I got it all together and everything is tight and looks great!
Pros: Pretty easy to figure out installation if you follow the above link and have mechanical know how. Sounds amazing, lots of looks and thumbs up.
Cons: Install instructions, lack of hardware. (IMHO any company should give you extra hardware, just in case, it wont break their bank)
Pic:
Videos:
Mine:
[ame=http://www.youtube.com/watch?v=_vxGkxida9c&list=UUh-4GTB_urCHQ9Pr7PzisZg&index=1&feature=plcp]Leo Vince FZ6 - YouTube[/ame]
And the one that sold me on the Leos
[ame=http://www.youtube.com/watch?v=ofdfkmaGJdI]Fz6 acceleration - YouTube[/ame]
Any questions or comments please feel free to post!
Link:
Leo Vince Install Step By Step
I used this link above, however it gets kind of vague towards the end of the install before reassembly.
First thoughts: Quality was amazing, well packaged and every bag was labeled. I was disappointed at the install instructions, they were more like a book of toilet paper, it basically said disassemble your bike fit hardware and check after a few hundred miles, no, seriously thats it.
Install is pretty straight forward, dis-assembly was easy, everything went together nicely. However I came to a shocking discovery that either I was not shipped all of the hardware or you really have to patch together the cans/rear fender hanger/ and support beams with the factory hardware and leo hardware. I got it all together and everything is tight and looks great!
Pros: Pretty easy to figure out installation if you follow the above link and have mechanical know how. Sounds amazing, lots of looks and thumbs up.
Cons: Install instructions, lack of hardware. (IMHO any company should give you extra hardware, just in case, it wont break their bank)
Pic:
Videos:
Mine:
[ame=http://www.youtube.com/watch?v=_vxGkxida9c&list=UUh-4GTB_urCHQ9Pr7PzisZg&index=1&feature=plcp]Leo Vince FZ6 - YouTube[/ame]
And the one that sold me on the Leos
[ame=http://www.youtube.com/watch?v=ofdfkmaGJdI]Fz6 acceleration - YouTube[/ame]
Any questions or comments please feel free to post!