05yamahafz6
Junior Member
Im having some trouble syncing my throttle bodies on a 05 fz6, i have the idle at about 1320 rpm and then using a carbtune i first sync cyclinder #1 to 21.5 cmhg and then sync the rest to #1. After this the idle is around 1440 rpm and everything is in sync, when i reset the idle to 1320 everything is no longer in sync. i even got to one point where the idle screw didnt do anything.
I ended up taking it to the dealer for a sync and now the bike vibrates around 5000 rpms,so i checked the sync and they set the vacuum to high at around 22.5-23 cmhg.
I would like to get this synced properly myself, is it normal they way i first did it when you lower the idle after syncing and its no longer sycned or did i do it wrong.
I ended up taking it to the dealer for a sync and now the bike vibrates around 5000 rpms,so i checked the sync and they set the vacuum to high at around 22.5-23 cmhg.
I would like to get this synced properly myself, is it normal they way i first did it when you lower the idle after syncing and its no longer sycned or did i do it wrong.