Givi 351FZ kit - missing bits

[owen101]

Hi,

Probably a dumb move but I bought second hand Givi 351FZ monorack arms for my fz6 s2 but only 2 bolts came with it. Does anyone know if the bolt kit could be bought separately ?

Fail that I think I only really need the lugs that expand into the frame tube to hold the exhaust mount in place and stop rattling. I could probably mock these up. Anyone know the width of the frame here :

351fz.jpg Photo by 0wen101 | Photobucket

Picture is a bit small sorry.

thanks,
Jason

 

[MG-242]

Here's a link to a PDF of the install instructions. The parts maybe too specialized to easily duplicate, but you could probably kludge something together. A suggestion would be to contact a Givi dealer and see if the parts can be purchased separately.

http://www.sporttour.com/givi_pdf/351fz.pdf

 

[MattR302]

Givi 351KIT fitting kit for sideracks (Yamaha FZ6 '04-'06 & 07-) - TwistedThrottle.com

Givi 351KIT has the parts you need (and some extras you probably already have).

I did model these expanding pieces up in Solidworks a while back, didn't make a blueprint for them though.

I installed a friend's SW-motech kit, it used a similar mounting method, just not an expanding adapter, it used just a round adapter like these that we needed to tap in with a hammer. McMaster-Carr

 

[owen101]

Thanks all.
I contacted a local Givi dealer in Dublin who kindly did a bit of chasing for me to source the bits direct from Givi in Italy.

Lastly, there is a brake light wire on the monokey plate. Easy to wire up to the bike ?