Just_Willliam
New Member
Hi guys, I’m new to this forum and I got this 2006 FZ6 sometime June 2019. Whoever had it before me converted the FZ6 to FZ6N, and also needless to say did not clean or take care of the electrical components while in his care.
The flash relay was not In the rear compartment to the left of the seat where everyone said it was supposed to be originally. I had to go searching for it and ended up finding it shoved between the front of the battery box and the frame. I snipped the two wires that were connected to the relay and ran wires taped together to the rear of the motorcycle, and fixed the relay where it was supposed to be originally (I did make sure that the right wires went to the right parts of the connector).
Now I’m having a problem where the front indicators are still a little fast, but my rear indicators (which are integrated), are solid yellow with a very faint blink. The indicator lights on the dashboard are staying solid.
Any ideas what could be the culprit? Thank you for the answers in advance!!
The flash relay was not In the rear compartment to the left of the seat where everyone said it was supposed to be originally. I had to go searching for it and ended up finding it shoved between the front of the battery box and the frame. I snipped the two wires that were connected to the relay and ran wires taped together to the rear of the motorcycle, and fixed the relay where it was supposed to be originally (I did make sure that the right wires went to the right parts of the connector).
Now I’m having a problem where the front indicators are still a little fast, but my rear indicators (which are integrated), are solid yellow with a very faint blink. The indicator lights on the dashboard are staying solid.
Any ideas what could be the culprit? Thank you for the answers in advance!!
Last edited: