Electrical pin extraction...

[alexfabian]

Hi Guys,

I have been having issues with my LCD display, with it cutting out during use. I have found it is caused by my LCD connector loosely holding the earth which is obviously not good.
I have bought a new connector, I just need to find out how to remove the old pins from the connector?

Does anyone know how to do this or if there is an extraction tool available.....

Apart from this fault and a nackered ECU the bike is fine

 

[Motogiro]

Most plugs that have a bad pin that I've worked with have a 1 or 2 tabs that you can push in with a small jewelers screwdriver which will allow the pin to slip out of the back of the plastic plug assembly.