- Joined
- Feb 7, 2009
- Messages
- 12,537
- Reaction score
- 1,184
- Points
- 113
- Location
- Cape Coral, Florida, USA
For those using a Canyon Dancer tie down system to help prevent damage to your grips, controls, etc.
Something I made up from some scrap PVC, some glue and some time to help reduce eliminate
damage to your grips, throttle tube, etc. Works great!
.
.
About 5" long PVC with a "coupler" glued to it and cut down(large enough to fit over your grip):
.
.
.
Slip it over your grip (Grip puppies installed):
.
.
.
Slip the Canyon Dancer over the PVC. This spreads the load greatly, your grip WON'T be forced into the controls:
.
Something I made up from some scrap PVC, some glue and some time to help reduce eliminate
damage to your grips, throttle tube, etc. Works great!
.
.
About 5" long PVC with a "coupler" glued to it and cut down(large enough to fit over your grip):
.
.
.
Slip it over your grip (Grip puppies installed):
.
.
.
Slip the Canyon Dancer over the PVC. This spreads the load greatly, your grip WON'T be forced into the controls:
.
Last edited: