pic colors of chain and sprockets sizes
-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
520 conversion kit
- Thread starter opds9091
- Start date
Dustin
MotorBoatin Son of a Btch
What will this kit do for your bike?
DonahuePhoto
Junior Member
i'm interested as well, does this help acceleration, overall torque, or top speed? idk, I=n00b :ban:
1- chain is lighter (and i bought the red)
2- I went with the -1 Front (the stock is a 16 i went to) 15
3- The rear stock sprocket was 46 to a 48
1-Now what that does is makes the chain lighter, increaser's the low torq, so when you hit the gas it just takes off, you have to hold on when the power ban kicks in what a rush.
2-I was able to get any size sprocket front or rear and the rear instead of the stock silver i went black.
3-You will lose top end, but why do i have to go 100-to 150 MPH.
4-The only thing i would advise is a speedohealer, when you change the sprockets you speed would be off, i had to go - 14.8 to get the tack correct, but it is very very good mod.
2- I went with the -1 Front (the stock is a 16 i went to) 15
3- The rear stock sprocket was 46 to a 48
1-Now what that does is makes the chain lighter, increaser's the low torq, so when you hit the gas it just takes off, you have to hold on when the power ban kicks in what a rush.
2-I was able to get any size sprocket front or rear and the rear instead of the stock silver i went black.
3-You will lose top end, but why do i have to go 100-to 150 MPH.
4-The only thing i would advise is a speedohealer, when you change the sprockets you speed would be off, i had to go - 14.8 to get the tack correct, but it is very very good mod.
luckyirishboy209
custom fz6 foot peg maker
dose the vortex have alot of noise coming from it? i know some sprokets are nosiey
ITSME
Senior Member
Ive been looking at this mod for sometime now, whats the cost of this kit?
