So where is everyone installing it? I'm a bit tossed at finding a good spot.
Pictures would help. Thanks in advance
Pictures would help. Thanks in advance
12v outlet installation
- Thread starter FrozenBiker
- Start date
rger8
Junior Member
Good question, I am wondering that myself!
S
Shamus McFeeley
Mine is zip tied to the right side of the subframe. It is controlled by a safety toggle switch on the front of the bike. It is wired directly to the battery so that I can use it to charge something even if the bike is not on. That is the reason for the safety toggle, as long as the red cover is closed, there is no way the switch can be on and drain the battery. I will probably bend up a more permanent mount out of sheet metal when I get a chance.
Adirondack Jack
Don't call me " Jun ior&a
http://www.600riders.com/forum/fz6-mods/30876-easiest-mod-12v-weather-resistant-power-point.html
Here's my post from last year. No problems at all!
Here's my post from last year. No problems at all!
scottsst
Junior Member
- Joined
- Oct 12, 2008
- Messages
- 898
- Reaction score
- 14
- Points
- 0
- Location
- North Bend ,Washington,USA
I put mine right were Shamus McFeeley put that switch this is what I did with mine I just took a battery tender lead and cut it off a used it to power the 12v outlet
Thanks for the info. I'm going to tuck it in the fairing somewhere on it's own bracket,
rather than make a hole in the panels. (in case there is a trade-in later).
The outlet from Amazon came in, and feels heavy duty.. Lifetime warranty too
[ame=http://www.amazon.com/RoadPro-RPPS-16ES-Extension-Cigarette-Lighter/dp/B001JT7B3A/ref=pd_cp_e_3]Amazon.com: RoadPro RPPS-16ES 12V 6' Extension Power Cord with Cigarette Lighter Socket: Automotive[/ame]
rather than make a hole in the panels. (in case there is a trade-in later).
The outlet from Amazon came in, and feels heavy duty.. Lifetime warranty too
[ame=http://www.amazon.com/RoadPro-RPPS-16ES-Extension-Cigarette-Lighter/dp/B001JT7B3A/ref=pd_cp_e_3]Amazon.com: RoadPro RPPS-16ES 12V 6' Extension Power Cord with Cigarette Lighter Socket: Automotive[/ame]
TeacherJoe
Junior Member
I don't have a pic, but I just moved mine to the fairing stay under the speedo. The stay has a hole, and I just bolted it through. I can take a pic if it helps.
Joe
Joe
rger8
Junior Member
Pic would be kool! I hate drilling holes!
Bates121
B l a c k L e a d e r
Thanks for the info. I'm going to tuck it in the fairing somewhere on it's own bracket,
rather than make a hole in the panels. (in case there is a trade-in later).
The outlet from Amazon came in, and feels heavy duty.. Lifetime warranty too
Amazon.com: RoadPro RPPS-16ES 12V 6' Extension Power Cord with Cigarette Lighter Socket: Automotive
I just got that one too I will doing the install this weekend still trying to figure out how to mount it.
