'08 FZ6 lower cowl/belly pan and seat cowl.

[babalugats]

Anybody know ANYWHERE in the US, although preferably WA, that i can get these? I have been looking everywhere I can online and haven't found anything. Wouldn't it make since that Yamaha actually sold these? If they do, I haven't been able to track it down. Any suggestions or help would be much obliged.

A

Mods:

Givi Side cases

 

[manas12]

You can probably order the belly pan from an authorized Yamaha dealer since Yamaha makes those. You can take a look at the pans on their website:
Yamaha FZ6 Accessories, Yamaha FZ6 Trim & Accents

As for the seat cowl, I personally am not a fan of the Yamaha OEM seat cowl. I think the TCP seat cowl looks much better.
You can also order after market trims from this website. They also sell the TCP seat cowl, plus some other stuff.

Yamaha FZ 6 Accessories. Wild Hair Accessories. Motorcycle Accessories & Aftermarket European Parts.

-Manas.

 

[mlevins77]

Anybody know ANYWHERE in the US, although preferably WA, that i can get these? I have been looking everywhere I can online and haven't found anything. Wouldn't it make since that Yamaha actually sold these? If they do, I haven't been able to track it down. Any suggestions or help would be much obliged.

A

Mods:

Givi Side cases

Got my lower cowl through Atlanta Motor World but of course I live here and didn't have to pay for shipping. They usually beat the prices of the OEM because they buy so many parts and bikes.

They've got a great sales staff that will work on pricing for you...but you've got to ask for a deal as no one gets anything without asking.

Hope this helps you!

 

[babalugats]

Thanks manas12.

you ever installed these? are they fairly easy or would it require a shop visit?

 

[babalugats]

thanks mlevins77. i'll check them out now.

 

[manas12]

Thanks manas12.

you ever installed these? are they fairly easy or would it require a shop visit?

I ordered the TCP seat cowl some 3 weeks ago. They ship them from Germany ( I think they are manufactured in Span(?) ) and take anywhere between 4-6 weeks to be delivered since they have to go through US customs, which causes most of the delays.

I'll put the cowl on as soon as I get it and let you know. As for the difficulty in installing it, I don't think it should be a hassle, especially since they come with all nuts and bolts and do not require any modifications to be done on the bike.

 

[manas12]

I installed the seat cowl yesterday and was done in 15 minutes. It really is a breeze. Just remove the seat, remove the two allen screws holding the toolkit box. Install the mounting plate for the cowl with 2 allen screws (supplied). Put the seat back on. Slide the seat cowl in position and bolt it down with 2 more allen screws (again, supplied). Done.

 

[Daybreaker]

Could we get some pictures please?
Thanks,
Daybreaker

 

[manas12]

Could we get some pictures please?
Thanks,
Daybreaker

Sorry for the delay Tommy, hadn't checked my posts in a while. But here you go

And profile:

 

[fazerfish]

Wow, looks good but not sure i could get my leg over that.

 

[manas12]

Wow, looks good but not sure i could get my leg over that.

Thanks. It's not too bad. How tall are you? I am 5'11" and I can get my leg over it even if the bike is on the center stand.