Hi all,
Fairly new to modding and maintaining my own bike, trying to learn as I go and largely tis going well
But now this week I went at the exhaust to swap out my stock one for a Dominator model I've purchased.
When I was removing the plastic fairing mold around the exhaust I came to a...
Hello,
When I bought my FZ6 S2 2008, I increase idle RPM by screw for stop "cradle" throttle cable. (see photo). I don't know whether it is good solution. I will be glad if you tell me how difference is between setting "stop screw" and original setting screw for idle RPM. (see second...
I've just converted my FZ6 to a naked bike. I'm selling the complete fairing and headlight assembly. $300 plus shipping, firm. Payment via paypal.
What's in the box:
1 Windshield 5VX-28381-31-00 1
2 Trim 5VX-28376-00-00 2
3 Screw, Round Head 90150-05023-00 5
4 Nut 90179-05523-00 5
5...
I've been leaking oil for several months now, nothing serious, just a small drip but since the weather is nice, time to take care of the problem. It appears I just need to purchase a new hose clamp and screw, since the stock clamp and screw doesn't tighten any harder. If that's the case, will...
I bled the rear brake a little while last month and recently found it has little as a little leak...I unscrewed the nipple and tried to seat it properly and screwed it in again but can't eliminate that little drop come out from the other side on the nipple screw..
May be I need to re-seat it...
The below links were taken from an FJR forum which I frequent.
The main difference between the FJR and the FZ6 TB's is that there is ONLY ONE throttle plate butterfly adjustment (between the 2 TB's for cylnders 1&2, adjustment screw, TB's 3&4), vs THREE on the FJR (4 separate TB's).
For...
I have an 06 and looking to replace some fairing screws and I have been unsuccessful at finding a kit. (I did find an aluminum one on Amazon) Anyone have a source for a decently priced screw kit?
I was looking into stainless steel bolts to replace some of the fasteners that are slightly rusting. I came across this valuable web page explaining stainless steel fastener properties. Thanks to Joe (BMW rider) for the article.
Keeping It All Together, Part 1