• Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.

power commander

  1. domination2727

    Multiple mod questions

    So this is my year to mod the bike to the full extent that I want. I have done quite a few mods up to this point mostly non performance. So I’m looking for opinions and advice to make the most of this and to save me from starting a swap without all the parts. My bike is a 2009 FZ6. first up...
  2. M

    Fluctuating idle. Sound like a big cam

    I picked up a laid over 2007 FZ6 with only 3200 miles recently and started working on a few modifications. Here is what I have done so far. 1. K&N air filter 2. Dominator cat delete down pipe 3. Some Chinese Trash knock off Exhaust ( don’t judge me lol ) 4. Power Commander Fuel controller...
  3. Z

    Loping idle after cat cut.

    Hello, Thank you for taking a look at this thread, take the information you may find helpful and use it, and post anything that may be helpful for the problem being expressed. I currently have a 2007 Yamaha FZ6 S2. I recently purchased a de-cat to go with my Delkavic slip ons. Currently...
  4. S

    FZ6 ASV Levers and Power Commander V PCV for sale

    Hey everyone, I have my power commander 22-014 for sale, previously installed on my 2008. I have had a great experience with it for the last 6000 miles. - asking $250 ($400 new) Also for sale are my adjustable F3 gold levers. I used a standard length clutch and a shorty brake lever, which I...
  5. cca310

    Complicated Power Commander III USB issues

    I've been trying to do some research on my issues for a few days now. Unfortunately, not only have I not been able to find a solution, I have not been able to find anyone who has had my exact issue. A quick background. I decided to purchase a Power Commander II USB for my 2008 FZ6. I purchased...
  6. Andar

    Installed exhaust, plugs, air filter + PC3 and lost 1/3 of my mileage

    I recently installed a bunch of mods and a PC3 map on my 08 and my mileage went from roughly 300km a tank, to 200-240km. Mods: Two Brothers carbon without baffles, Iridium plugs, K&N air filter, PowerCommander 3 and O2 sensor eliminator. Cats are still installed. I installed the "410-004 Two...
  7. R

    Battery Issues + Jurky power delivery

    Here is the problem I had earlier with my bike. I was away for a month so my bike was just sitting in my apartment complex. Once I was back, I started the bike which started it in two tries.I thought bike is fine no issues with bike. I go to my bike after 2 weeks and the bike would not start. It...
  8. A

    Power Commander

    Hi All I have added new Leo Vince exhausts, iridium sparks, looking to upgrade my air filter then was going to invest in a power commander. However, when did power commanders become £270? I genuinely thought it would be less than £100, any suggestions?
  9. Zealot

    Two Brothers Pipes/ Power Commander 3 / 08 FZ6 Engine

    Power Commander 3 / 08 FZ6 Engine for sale! Heya folks! I've got another thread going with little odds and ends, but I figured a thread highlighting the big buck type items would be worthwhile. Payment through PayPal, you pay shipping! Post here or shoot me a PM! Other thread...
  10. M

    Power Commander V Leo Vince Map?

    Does anyone have a map for the power commander V for a 09 Fz6 with leo vince exaust no baffles, Stock air filter?? I would appreciate some help!!
  11. I

    Power Commander 3 or 5?

    Anybody have experience with both, or have a recommendation for one over the other and why? '07 stock.
  12. L

    Batteries and Upgrades

    Hello Few questions... I have a 2008 FZ6 S2. It's all stock, I need a new battery, any recommendations for a decent one? Also any recommendations on power commanders and air filters and cans? I want a power commander, with some upgraded filters and none-stock cans not for super...
  13. mikw73

    PC III USB - first test ride - stuck on road for first time

    I'm hoping this is a low idle setting problem. That's what a couple of other threads pointed to, and my idle is lower with the PC III than it was before. About 1050 - 1100, whereas it was 1200-1250 before the PC III. I found the idle adjustment, and I'm guessing that I just follow the...
  14. ScubaSteve08

    2006 fz6 in Colorado

    First let it be known that THIS MOTORCYCLE HAS A LIEN ON IT from Credit Union of the Rockies. I still owe $2,800 roughly and if you do want this, you will have to take the loan with it. I'm just hoping to get a little bit extra to throw at a new bike. There is nothing wrong with the loan, I have...
  15. ScubaSteve08

    FZ1 Handlebar mod

    So I just got the bike back from the shop for a major tune (new plugs and an K&N air filter. Got it home and put in a PCIII (YES!!!!). Now it feels like it wants to leave me behind every time I hit the throttle lol :rockon:. So my next mod I wanted to do was to change the bars. They make the...
  16. T

    FS: Two Bros CF exhaust, PC III, Belly Pan, lower cowl like new.

    Hey guys! Unfortunately my bills are piling up, so I have some aftermarket parts I'd like sell and my buddy said this is a good place to do so! Everything is in EXCELLENT condition. You can hardly tell it's been used. I will post pictures when I get the time. For Sale: Official Yamaha Red...
  17. ScubaSteve08

    Just Bought a 2006 FZ6. Need some help.

    So i got this new bike from Coyote Powersports about two months ago. First real street bike ever and I'm loving it. Only has 4,400 miles on it. So now i want to start doing stuff to it. I know i want to put on an aftermarket exhaust and that in turn means gettin a Power Commander too. But do i...
  18. S

    Power Commander + 2 exhaust 2 brothers for sale

    Hey, I have a power commander and 2 two brothers exhausts. Everything like new. I would like to get $ 649 dollars + trade in original exhaust for my FZ6. the system is good for 2005 to 2009 fz 6. the value of this new 3 parts set is $ 2400.- please email to [email protected]
  19. tskorka

    PCIII Connection Help

    I just got a Power Commander PCIII. There are 4 connectors but per the instructions it seems only 2 are used. Is this correct? Thanks
Back
Top