Search results

To the top!

Currently I have a 15 tooth up front and stock rear. I am looking at going with stock 16 tooth and a 48 tooth rear. The stock chain was fine going down 1 in front. But with going up in the rear I'm having trouble figuring out what length chain I need. I'm thinking 122 link but not sure.

Ok. So I figure that white/red does nothing cause there isn't a wire on the other plug for it and it's on the bike and everything works fine. Now I gotta figure out the speedo error, I have a -1 sprocket up front, and figure out a fairing for the headlight.

These are off an 05, but will fit 04-06. $60 shipped in the continental US.

So I have over 30k or maybe over 40k on my fz6. I want to check the valve clearance but should I buy the shims first so I dont have to pull the head twice? I found this site with good prices on shims but don't know which to buy. http://www.powersportsuperstore.com/Shims-s/797.htm

It's a first gen round type. Yes the white plug has the neutral wire red/white. When I got the gauge I plugged it in to make sure it worked. The bike started up. And looked like everything worked, but the turn signal indicators and the high beam indicator because the wires weren't connected. I'm...

Mud, were you able to look at your wire harness?

Yea. Sorry I got both plugs in the pic. It's the black plug. It's a white wire with 2 red stripes. Now I know I'm not color blind. The wire is white with two red stripes.

So this is the side of the plug that has the white/red wire. This is the other side of the plug that goes to the gauge. It doesn't have a white/red wire and the hole is plugged. Where does the white/red wire go?

So after about 4 years of not having a speedo, I finally got an OEM replacement. In the mean time I had cut the sub harness doing a naked setup. I think I have all the wires figured out except 2. It is an 05. I believe the yellow wire from the speedo gets connected to the black/yellow wire for...

Where in AZ are you? I'm in Gilbert.

Just got the speedo! Great seller and fast shipping. Thanks again!

You got the front rotors available?

I'm usually in 3rd sometimes in 4th in the city at 45-50 mph. Can't say what rpm range that is as I haven't replaced my speedo/tach from my crash 3 years ago. I just have my gps so I know my speed.

That's awesome! I'm picking up a 96 fzr 600. My son and I are going to work on it and try to bring it back to life.

You sure it's oil and not fuel? If the tank is full and hot outside the fuel or fuel vapor will run down the tube.

Reduced to $80 shipped.

These are sold

Rearsets help a lot! Since then I've put danmoto clipons on also. As far as gear its hard for me to find stuff that fits good. I'm 6'4" so large jackets fit my long arms are a bit baggy in the chest. Medium jackets fit the chest but too short in the arms. Pants I wear a 32/34. Regular pants are...

I was trying to mount the r6 light up to my bike. After making a custom mount and threw it on I thought it was too far out and not enough support for cross winds. Pulled it off and put the sv650 headlight back on and just bought a gsxr headlight. Just need to figure out how to mount it.