Search results

:eek: Got no advice, but I'm glad you're ok.

As mentioned in the original post, I am using 2 Hella FF75 offroad lights, these use 12V/55W H7 Halogen bulbs, so essentially you could use any H7 bulb you want. I have the bottom wired to low beam and the top wired to high beam using the same bulb, the only difference is the light throw. I...

Funny you should ask because it was Wavex and Wolfmans bikes that inspired me to go naked in the first place. In fact, the first time I saw Wolfmans bike with that bagster tank protector (not on it anymore) I new that I wanted to wrap my tank to look like it was covered in leather :thumbup...

Not too hard, the mounting holes are about a 1/4" wider on center, so I just squeezed the rear sets in a vise. The shift linkage needs to be bent to fit around the frame and the master cylinder mount has to be removed and a new one fabricated to move the master cylinder back away from the frame.

Wow :eek: aside from the kickstand incident, that is some amazing riding!

Yes, you are confused

Lone...I've missed you buddy :D

That would be pretty badA$$ :)

Do it, it really doesn't get that pricey when you are doing it yourself. I will go back to the original post and add my costs to each item and see what it ended up costing me.

Front wheel backwards :confused: I don't think so...

Glad the damage was minimal, I would have done the same as you and left the cover on, the thought of the wind blowing it over would never have occurred to me :(

Thanks, yes wrapping the exhaust has crossed my mind, still on the fence though.

The swingarm is a piece of cake, direct bolt on, however, the suspension is another matter, it is centered rather than off to the side and requires new mounting points for the shock. I tried to show in the pictures the new top mounting point that I incorporated into the new subframe as well as...

I like the black, glad your ok.

Nice! I like it :thumbup:

Thanks and no, the plate wont hit the hugger there is about a 4" gap there and only about 1.5" of travel, suspension is stiff :D

DB-01R, time and patience. Unfortunately it was mainly trial and error and I don't remember alot of it. I have the MPH, RPM, Odometer, Fuel Gauge and Signal Indicator working. The N Indicator does not work, the Fuel Gauge is inaccurate and the oil indicator light is always on.

Note: BYF = Backyard Fabrication (Means I made it) Handle Bars: Total $280 - $20 Drag Bar - $65 Rizoma Grips - $25 eBay black anodized Levers - $150 Koso DB-01R Speedometer - $20 (Material) BYF Riser (Powder Coated Black) Front Suspension: Total $355 - $180 98-01 R1 Front Forks - $75 98-01 R1...

Glad to hear that you were not hurt.

:eek: I don't know if I would have died from the heart attack or from dropping the bike, that guy has nerves of steel!