Search results

Fantastic! I love engine rebuilds 😂 Yep you guessed right a blown headgasket

The filter sock was gone, fuel pump sucked it clogged also the injectors was clogged aswell

Fuel pump motor and regulator arrived today. Missing part inside the fuel pump assy. Managed to find one that will fit. Its a small piece of plastic that holds the Oring in place between the two halves of fuel pump housing. Tank full of rust, cleaned and sprayed with iron phosphate to protect...

Good thing is bottom end isnt touched by the previous mechanic. They've rebuilt the engine not touching the water pump, thats where the leak is not the HG, then they rode it and overheated As for the color the owner said he wants to restore it back to original color He also have another fz6...

First warm up and idling Just water for the mean time New radiator hose and radiator cap need replacing Just a bit more tinkering

Good day to you all I have another on going project Bringing this neglected bike to life again 2005 FZ6 Blown head gasket no wonder why they've rebuilt the engine not replacing the head gasket instead they used RTV 😂 And 2 sparklug holes stripped sourced another Cylinderhead Lapped the...

No, the set screw is pressed against the thread of the inner tube That dimple is the problem aside from being bent thats the part where the fork seal run into

I managed to get it out Bought square shape drive bit Blowtorched the sh*t out of it then came out I thought all along theres only one bent fork leg I was wrong one looked, tested it rolled on a glass table and its wobbling too

I saw one for sale on ebay i guess its from china

I cleaned mine dipped in ultrasonic cleaner

Im rebuilding front suspension only replacing the inner tube Allen hex too loose metric or sae Torx way too loose This is the first time ive seen this type of set screw

Tank dent is not that bad, im thinking of buying whole tank cover, i'll ask my denter first if he can do repair or not. The tank is hard and double layered

This This would be a good upgrade from gen 1 mt09 i' ll take a look at it

Ive been wanting to buy a new bike for quite some time Specifically a MT09 after i test ridden a gen 2 Out of nowhere i was asked an offer i cant refuse Its a crashed bike and alot of work is needed Bent one of fork leg Leaking on both forkleg Dented tank Yeah shes in rough condition but not as...

I dont know what that means but heck yeah! 🤘Hahaha

I'll just share some of my experience regarding this. Been through tps sparkplugs and coils, advanced rotor seems to help a bit So i decided to replace my fuel regulator with a new one from toyota corolla i believe its higher about 40psi than the stock 36psi I adjust my CO values lower With...

Fuel pump is shot , i used mine Its good to have the same bike just for this case.

Heres another Fz6 neglected for years being resurrected. Bike wont run compression on all cylinders are ranging 100-120 psi and blowing smoke out of the breather hose We decided to tear it down and replace all pistons rings checked all the bearings and all is good Now its running and lo and...

Solved! I pulled the plug of tilt sensor and found out its full of dirt Cleaned and reconnected Everything works now I still cant believe this happened to me! Spent whole night chasing after wrong plugs

Clutch safety switch and sidetand switch is already bypassed The owner bought used harness ecu and key from a known running bike which is currently installed on the bike .