Search results

Latest updates.... Finally figured out how to go in to the Diag mode after reading few more things which was not in the earlier posts (thanks tomari). On 08, once you get to the dI mode, you let the buttons go and repress both "select" and "reset" button at the same time while dI is...

This is very possibly what is happening to me. I will try this out and get back to you. Do you think this will be more pronounced when you don't have full tank of gas? Now that I think about it, I think I get this problem more when my tank is less than 1/2 full which may be because it is...

Ditto. I can't seem to get to it on my bike either. Mine is definitely a 2008 and behaving the same way. Anybody has any ideas for late model bikes about how to get to the diagnostic mode?

That is because that part should not have been sold in Australia based on the part number.

You wanted to one from the "faired" FZ1 and the correct part number is: 2D1-26111-01-00. You bought to one for the FZ-1N (naked version) which does not have the thread because naked version have different grip setup.

Hmmm... That's interesting. I am shorter (5'8") and I did not have any noise/buffeting around my helmet until I put the taller screen on. But, with the stock screen, I had no protection whatsoever and was getting tossed around especially when I was passing big vehicles on the highway. That's...

Sorry, I didn't answer that question. Yes, it is same distance (at least on mine), and because of the sharp incline on the TS seat, you will "not" be able to sit in a same position on TS and will find yourself pushed forward compared to stock seat. As good as they are, I am not sure TS is what...

At that point the fan is running so I can't really distinguish the fan sound from the fuel pump sound, but, fuel pump relay not working (therefore fuel pump not working) may explain bike not starting up again, but, I don't know why it would not cut off when it hits that temperature range when it...

My bike developed this strange behavior lately. It may have been there for a while, but I did not notice it because it requires very specific set of circumstances to manifest itself which does not happen to me all the time. Here is the issue: If by bike is at the temperatures that is over...

+1 on the Multi-use. Another good thing about it over the standard chain lubricant is the fact that it stays on the chain rather than getting on to everything else if you follow the instructions and wait a while before riding, usually overnight.

Somebody here has 440D. Seen a thread about it while back although the person did not say a lot about it. It is about the size of the medium size Cee-Baileys (I have the largest size Cee-Bailey on my bike at the moment). I haven't tried 440D yet, but from the look of it (I checked them out at...

You can probably buy an original sized one from somebody who does not want it on this forum. Then, you can sell your "touring" version to others who might be interested. If you don't like the original version, you can try cutting it down more. I seriously doubt you will get much...

That's because there isn't one. ;) There is a post out there somewhere which has what I tried out so far (I can't remember which thread it is in now). I am on my 4th screen and still searching for the "perfect" one. If you find one, I would like to hear your opinion.

If you sign up here: https://www.yamaha-motor.com/sport/myyamaha/login/L3Nwb3J0L215eWFtYWhhL2hvbWUuYXNweA==/starthere.aspx You can download it.

This I would like to see, because fairing brackets are right on the way of where frame sliders would go on the late model FZ6s. Did you decide to use the frame slider as one of the fairing brackets?

Responded to PM. :)

I think different seat height in TS seats is a crapshoot. I have standard TS seat and the height is identical to my original one. So, height difference is more likely due to who happen to put it together or maybe difference in seat pans. One thing is for sure, you will not be able to slide...

I have older style ones.

What about the manufacturer of the clutch? Are they planning on selling matching levers? I like this item, but, I am not sure about mismatched levers.

I was actually thinking about running light/stop light combo AddMoreLighting sells that can be added on to existing "just brake light". You would need to do some creating wiring inside for either option, but it will take care outside wiring issues.