• Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.

Search results

  1. killertofu9

    Philips Motovision bulbs

    Just ordered a set for the fz6 this week and should be here tomorrow, any1 ever use them? Sent from my Sony Tablet S using Tapatalk 2
  2. killertofu9

    Integrated turn signals and brake lights

    Since this threads been revived, added pod light turn signals the other day and removed the signal stalks. Used R1 pod sockets and wled x-HP5s from superbrightleds.com along with a flasher relay.
  3. killertofu9

    Integrated turn signals and brake lights

    No, and the 3wire plug is just the brakes. It has a 2nd harness for the turn signals blue/black and yellow/black like I posted above. For motodynamic taillight Brake light harness to> led stalks Running light (red/brown) >>>(yellow) Brake signal (white) >>> (red) Ground (black) >>>...
  4. killertofu9

    Integrated turn signals and brake lights

    Just refering to the 3wire plug that connects to the stock tail light socket from the moto tail. Mine was white/black/red or brown, dont remember which. I tied my turn signals w brake into the moto harness.
  5. killertofu9

    Integrated turn signals and brake lights

    So the led turn signal wires are as follows iirc LED wires = duty = Bike stock harness Yellow = running light = Blue Red = brake signal = Yellow Black = brake ground = Black Blue = turn signal Brown(left) Green(right) Green = turn signal ground = Black LED wires = duty = Motodynamics...
  6. killertofu9

    Integrated turn signals and brake lights

    It sounds like you might have the brake signal wire switched with the power or ground. Are you using the stock taillight or an aftermarket one. I assume your trying to connect the led turn signals with brake lights from the2wheels. You should have 2 wires for turn signals and 3 wires for...
  7. killertofu9

    Integrated turn signals and brake lights

    Not really, they are slightly shorter than the stock stalks which were fine thanks to the frame sliders when it layed down walking it around a friends driveway and they have some flex since I used the stock fender and mounts.
  8. killertofu9

    Integrated turn signals and brake lights

    The relay is needed if your front signals are led. If there is no incandescent bulb in the circuit it causes quick flashers since the pcm thinks there is a blown bulb cause of the low resistance.
  9. killertofu9

    Integrated turn signals and brake lights

    Correct, the stock tail is just red lense and incandescent bulb, no signals or quick flash. So yours sounds aftermarket.
  10. killertofu9

    Integrated turn signals and brake lights

    They are about 4in long, the running/brake leds are red and there are amber on the tip for turns. 2 rows of leds 8red and 4amber at the end iirc for 16r and 8a per stalk.
  11. killertofu9

    Integrated turn signals and brake lights

    Re: Integrated turn signals and brake lights (new pics/vid!) Finally got around to uploading the pics after her wash and shot a better vid of the lights, had to set it at a low angle to avoid glare. Enjoy. The2wheels levers. Crappy camera, need a new one for xmas. :D...
  12. killertofu9

    New To the Fourm... Sliders? To Get or Not to Get

    As a new rider I put frame sliders on my FZ6 within the first week of bringing her home and they saved her from any scratches/damage both times she decided to lay down while I was still getting used to moving the bike around on foot. For low/no speed drops they do their job well.
  13. killertofu9

    Integrated turn signals and brake lights

    Thanks everyone! I got them from the2wheels, same company that sells the levers on ebay that several members are using. They were $27+ shipping and tax. Solid build, a wiring diagram would have been nice though.
  14. killertofu9

    Integrated turn signals and brake lights

    Just finished up my first mods on the bike, aside from the oes frame sliders. Installed the2wheels clutch/brake levers, 2wheels rear turn signals w/brake lights and the motodynamics integrated tail light. Here's a quick vid of the lights, sorry about the quality. Will take some better pics...
  15. killertofu9

    First maintance & winter storage

    Ok I'll change the oil and filter than. Wasn't sure if there was anything else that needed to be done besides oil at the first 600mi during break in. I wil put it on the center stand, also I lube the chain every wash. Armour All the wheels and seat, turtle wash n wax the rest, chrome polish on...
  16. killertofu9

    First maintance & winter storage

    Looking for some advise on which route to go. The temps are dropping and not coming back so next weekend I'm looking to garage the bike for the winter. Going to wash her, fill up the tank, add some fuel stabilizer and park her in the garage under the covers. However I'm still in the initial...
  17. killertofu9

    I made it snow!!

    OES frame sliders came today :D
  18. killertofu9

    Thanks for the rep dude!

    Thanks for the rep dude!
  19. killertofu9

    I made it snow!!

    Thanks all! Looking forward to Friday, giving her a bath and taking her into the country for some better pics. Been going out every afternoon b4 work, getting better at starts and smoother shifts. Definitely in love lol.
  20. killertofu9

    I made it snow!!

    Bought my bike on Friday so of coarse it snowed on Saturday. Picked it up on Monday. 2009 FZ6, 3mi on it when I picked it up, 50 now:D First bike and loving it.
Back
Top