FZ6 maintenance progress by toybox

Naked butt looks good too, I have to find time to replace the clutch plate and gasoline pump.

Looking good, interested to see how this ends up looking

93972KM
No pictures but I replaced the clutch consumables, I would like to ask everyone for photos of this part, if you have any repairs done.


Because I found that the position in the first picture is shortened, maybe it is the cause of clutch slippage?
I use a torque wrench to fix the six screws of the clutch. The conversion data in the manual is 81.6kgf.cm. I use 85 for fixing.
If you think the lever on the clutch is difficult to fix, please relax the spring first and loosen all the clutch clearance screws. There is an adjustment position on the left handle and under the left fuel tank and air filter. There are currently no video tutorials on the Internet. Describe this item

This is the license plate frame of R1, and the ring blinker. I will change the red to yellow later because it is not conspicuous enough.
The parts currently used are all from China
direction light

R1 License plate frame

R6/FZ6 gasoline pump

Clutch plate

Gasket

I can guess what the problem is. When first gear enters second gear, there is a chance to enter neutral, and the power cut I feel in second gear should be because "the engine is running in second gear, causing the gear to jump back to neutral and then jump back to second"

Chip anti-theft requires test distance