Recent content by Tedpro

  1. Tedpro

    Oil/Oil Change

    Hello, I have an fz600 1986. I can't seem to find a manual on my bike. I need to know how much oil to put in for oil change, and what type of oil. Thanks
  2. Tedpro

    86 Fz600 Headlights/Muffler

    Hello, I need to get new headlights for my fz, can I just get bulbs, or do I have replace the whole thing if so where can I get the whole thing? Also what is a good replacement muffler? -Do all other Yamaha mufflers fit on?
  3. Tedpro

    Sprocket Cover Cleaning

    Wasn't sure what to do use for lube, or how it should look.
  4. Tedpro

    Sprocket Cover Cleaning

    Hello, Now that I've gotten my sprocket cover off, it looks a little nasty in there. I was thinking of using break cleaner to help wipe off all the old grease, and use white lithium grease to replace it with. Any suggestions?
  5. Tedpro

    86 Fz600 Starter Installation

    I tried rotating it, and that didn't work. So I popped the sprocket cover off , and just pulled it out. I was just nervous about doing that , because I've never really worked on a motorcycle. I think it was about 5 bolts. Put new starter in, and everything worked. Thanks for everyones help.
  6. Tedpro

    86 Fz600 Starter Installation

    Here are the pictures : Left side http://imgur.com/wq0Qc.jpg Left side zoomed out http://imgur.com/ZUSb5.jpg Right side of bike http://imgur.com/00I1H.jpg
  7. Tedpro

    86 Fz600 Starter Installation

    Hello, I figured out my starter went bad on my motorcycle. I bought a new starter, and just need to get it in. Can anyone tell me , step by step how to take it out? So far I just unscrewed the 3 screws that seemed the holding most of it on, but I can't seem to get it out. Thanks ...
  8. Tedpro

    86 FZ600 Wont crank over.

    So I got the bike back. Put the new gas cap on(the one before was falling apart) Tried started , and no work. But I bump started it in first gear, started up great - and now normal start works. And since I've had it , it killed itself after a long ride when I was coming to a stop. any ideas...
  9. Tedpro

    86 FZ600 Wont crank over.

    Whats the spark plug gap supposed to be on these bikes?
  10. Tedpro

    86 FZ600 Wont crank over.

    Hey Ted :thumbup: I can pass than onto the mechanic. Is it possible that having it on one of these incorrect settings , I would be getting the problem I am experiencing? -Thanks
  11. Tedpro

    86 FZ600 Wont crank over.

    Hey Fahren, --Sorry that 2nd part of my first post - its from another forum, that had a similar issue to me - but not the same issue. So it should still have ignition module. Unfortunately its with the mechanic right now, and he is certain that my motorcycle requires a fuel pump. He is...
  12. Tedpro

    86 FZ600 Wont crank over.

    by bump start you mean drop clutch in 2nd gear while rolling? Yes I have done this, and this did work for a while. Now all it does it just try to turn over over.
  13. Tedpro

    86 FZ600 Wont crank over.

    Yeah lights are showing up on the dash. The mechanic said the battery was bad as well. So I assume he tried it after replacing it. :-p I found diagrams on website : bikebandit.com -- I don't think I found a fuel pump for anything, but I did order this part : Yamaha FZ 600 Year 1986...
  14. Tedpro

    86 FZ600 Wont crank over.

    Hello, I'm new the forum, and my 1986 FZ600 has been acting up. I recently bought it , and everything was working great. After about a week it started to get progressively worse , and now it just wont turn over. --I'm not sure if this is the issue, but I put mid grade gasoline in it. I...
Top