Recent content by rachtak

I bought this brand new. If they came screwed onto the base, then they should still be there since I havent tampered with anything on the projector... I was thinking those parts would come in like a seperate bag

I opened up the projector and greased up the springy-flipper-thing. I dont know what you mean when you say the "order of the pieces"/"distance between the bulb and the lens". I looked online and found: http://www.theretrofitsource.com/pdf/trs_tech/Morimoto_Mini_D2S_Projector_Hardware.pdf is...

Thanks! Ill start from the top of your instructions and work my way down until I have to ask you again :D

Hi, I am in the process of installing Vishnu's VS02 kit as well as a Morimoto Sportbike stage III kit. I have used the instructions provided by dev_usc as well as this thread (http://www.600riders.com/forum/fz6-mods/49157-naked-hid-projectors.html). However, I am currently stuck as I do not...

It was the tail fuse! Thanks so much for your help.

Hi, I just bought a used scorpion exhaust off of ebay. It came will all the parts and wiring; basically ready to go. I slipped it on and connected the wires as best I could (there are wires that came with the pipe that don't seem to connect anywhere?) but some lights don't work. What works...

Hi, I stripped the threads in the top clamp of the kill switch housing when I was tightening the throttle down. Does anyone have the top part of the housing I can buy? I've bypassed the wires on the kill switch, so the switch itself doesn't need to be functional. Thanks!

I have for sale a set of stock brake and clutch levers. See below for picture. Both are fully functional. They have a few scratches from normal use. Both have scuffs at the ends from tip-overs/falls. I think the clutch lever might be slightly bent, but Ive never known anything else, so you can...

Thanks, guys. Can someone tell me what a CAT pipe is and if that presents a problem with the setup pictured in the link?

Hi, I just bought used scorpions off of ebay. 04 05 06 Yamaha FZ6 FZ6R FZ600 FZS6 FZ 600 Scorpion Exhaust Slipon Pipe Pipes | eBay I am running a completely stock fz6. Once these arrive, is it a very simple install, just plug and play? Or am I missing parts that would've been included if I...

Are these a simple replacement with a 2006 FZ6 bars? Is it just plug and play? Will the stock bar ends fit? Thanks.

Did you ever figure this out? I have the exact same sound as you describe; a screaming/wailing noise that starts around 50mph and gets drowned out at ~70mph.

I've decided not to risk it. Thank a lot guys

California, off of the highway 5 near bakersville. I'm on my way up to the Bay Area. Unless, someone can come help me replace my radiator, I don't think that there's much help that can be done for me...

I'm in need of a quick response. I rode 100miles, got off Ty highway to pull into a gas station and noticed that my radiator was leaking coolant. There's no way to fix it at this current time and location. I have 200miles left. All freeway, no traffic. Can I keep riding? Will the bike air...