Recent content by kyle_ott

Hey guys, im almost NEVER on here but i had one custom made for me about a year ago. i paid 150 for his time and about 60 for my own material. here is how it looks. Im selling my FZ in a week or so so its up for sale if anyone wants it. e-mail me though as im hardly on here [email protected]...

well ive been forced to park my bike for a year or 2 due to tickets last summer. 186km in a 100- criminal conviction 6 points, $750 fine, $550 for a lawyer. 2 days later 110 in a 50- careless driving 6 points. and a careless driving- went up to the red light through 2 cars with my girlfriend on...

Last summer i had over 200 1/4 mile races. with the stock 16t sprocket i was not able to get under high 11.4s clutchless shifts after 1st-2nd, running between 116-121mph. when i swapped my sprocket to a 14t i was running consistant 11.3@118mph. keep in mind this was done in Calgary Canada @...

i know i know.....going to cost me 1,100 to fix!!!!!! i switched my sprocket to a 14t for 1/4 mile strip (had over 200 runs this summer) apparently i was suppiosed to use a NEW dog ear washer when switching the sprockets. this is what happened.

Heres my bike, not quite finished yet....

i too did the airbox mod....sounds good. But i wouldnt recomend drilling or cutting more than one hole in the airbox, it will only cause turbulance.

"Sprocket Specialists" (is the company). there in the USA somewhere. only thing is i havent been able to ride my bike for almost 8 months now because i didnt use a new dog ear washer when i installed it. I ended up stripping the threads where you bolt your sprocket on. Im lookins at $67.00 in...

as long as there 43mm they'll work

he guys, i just moved back to toronto from calgary and i got my fz up to 262 with stock sprockets, airbox mod, drilled out cat/pipe and no fairing. once i put a 14tooth sprocket on the front i red lined in 6th gear no problem. my speedo was reading 293-288 back and forth off the rev limiter but...

i saw this the other day.... someone has finaly made a lowering kit for the FZ6 http://www.whaccessories.com/METLoweringKitsAll.jpg

i got a custom stunt cage for my bike made in the summer. WORKS AWESOME! only cost me...... $70 for parts and $140 to have it made. i went to home depot and got black seamless gas pipe. ive kicked my bike over just to see how strong it is... STRONG take a look. First FZ6 Stunt cage? -...

im guessing you could always go with a R6 exhaust system.....it will end up being a side exhaust though.

i gutted my cat as best i could. took a 12'' drill bit 5/8 and drilled out as much as i could. then i took the bit and knocked all the rest out. you might need a exhaust gasket after doing this if your not careful. i did this the same time i put a K&N air filter in, drilled my exhaust, and cut...

i cant be %100 but im sure the right one will fit but the left will not. not unless you fab some linkage links for your shifter.

well ive been looking around this site for a while and finally joined. ive found an awesome alternative for front flush mount turn signals. and there ONLY $34.50!!!!! Almost identical to watsons but only 20% of the cost Rumble Concept Patch Plate LED Signals Yamaha :: New Enough Motorcycle...