Hi Blackdak47
I removed the FZ6 bar end and machined the bullet looking blob off of the threaded section level with the handlebars using a lathe. I then drilled and tapped the threaded section to accommodate a 6mm stainless cap screw and fitted the R6 bar end.
Sh1t, I hope this makes sense.
FZ6-ZN
I removed the FZ6 bar end and machined the bullet looking blob off of the threaded section level with the handlebars using a lathe. I then drilled and tapped the threaded section to accommodate a 6mm stainless cap screw and fitted the R6 bar end.
Sh1t, I hope this makes sense.
FZ6-ZN