fire561
Junior Member
Blew my motor the other day... 154mph then boom there she went. Anyone have motor casings layin around?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Blew my motor the other day... 154mph then boom there she went. Anyone have motor casings layin around?
It was a private road.Just curious, you were on a track right?
It was a private road.
how long were you at that speed? I thought that the bike was governed to 150 mph.
I have an uncle with a very large farm and a straight flat asphalt 6 mile long section road right down the middleVery Private I hope, but I am curious for the top end run and how long were you at that speed? I thought that the bike was governed to 150 mph.
I am POSITIVE the bike isnt governed by anything other than its own horsepower, I think Nelly is due to chime in on that, just look at his avatar lol but to the OP the motor should not have grenaded at that speed....with 33,333 on my clock as of earlier tonight, my bike has been held at redline in 5th/6th for give or take 15 miles, (dont ask, just know it was called for) ( http://www.600riders.com/forum/bar/49748-ever-been-bullied-story-time.html ) , drag raced and hotlapped for 2 seasons now and she has held together like a true champ. The FZ is truly a TOUGH bike, so id suspect there was an oil problem, cct, or something that could possibly have been foreseen. (not blaming you, just stating) If you were close I would 100% help you put it back together, I have built a few motors in my day lol best of luck with your searches!!!
Very Private I hope, but I am curious for the top end run and how long were you at that speed? I thought that the bike was governed to 150 mph.
.but theres someone who fitted a R6 motor into our frame, so that may be worth checking out.
I was doing a speedo healer calibration and at that speed for probably 15 - 20 seconds. I wasn't timing how long it took to get there. The bike is not governed.I am POSITIVE the bike isnt governed by anything other than its own horsepower, I think Nelly is due to chime in on that, just look at his avatar lol
but to the OP the motor should not have grenaded at that speed....with 33,333 on my clock as of earlier tonight, my bike has been held at redline in 5th/6th for give or take 15 miles, (dont ask, just know it was called for)
( http://www.600riders.com/forum/bar/49748-ever-been-bullied-story-time.html ) , drag raced and hotlapped for 2 seasons now and she has held together like a true champ. The FZ is truly a TOUGH bike, so id suspect there was an oil problem, cct, or something that could possibly have been foreseen. (not blaming you, just stating)
If you were close I would 100% help you put it back together, I have built a few motors in my day lol
best of luck with your searches!!!
I was doing a speedo healer calibration and at that speed for probably 15 - 20 seconds. I wasn't timing how long it took to get there. The bike is not governed.
The engine is pretty bullet proof with regular oil and filter changes and likes to be revved. I didn't screw it in every gear to do my top speed run just rolled it on and hid behind the screen.
Nelly
why would you be burying me?If he puts an R6 motor in there, we'll be be burying him, literally
why would you be burying me?