crazy dave
Junior Member
I know the blink rate is fast but here is how i set up my rear signals
custom rear blinkers
- Thread starter crazy dave
- Start date
crazy dave
Junior Member
ok sry having problem with my video. I will have it up by the end of the day
LFS-1-FLAT $8.95 Electronic flasher..
Super Bright LEDs - Electronic LED Flashers Specifications
Super Bright LEDs - Electronic LED Flashers Specifications
crazy dave
Junior Member
I tried resistor and the didn't work...probably something I did wrong but I cant wait to get this video up
Why use a resistor when an $8 electronic flasher works too? Resistors can burn out, and turn electrical energy into heat, just like a regular bulb. Plus they're usually more than $8 if they weren't included, and you have to splice them into your wiring.
PS: If you wired the resistors between the 2 wires, instead of in series in one wire, it won't do much of anything, since the LEDs will have lower resistance than the resistor.
crazy dave
Junior Member
Those are cool looking! Are they visible enough when someone is directly behind you?
Inside the fairing on the left hand side you will find the OEM flasher. It's mounted low with a little rubber mount. It has a plug with 2 wires.
Easy and cheap to swap out.
crazy dave
Junior Member
Those are cool looking! Are they visible enough when someone is directly behind you?
Inside the fairing on the left hand side you will find the OEM flasher. It's mounted low with a little rubber mount. It has a plug with 2 wires.
Easy and cheap to swap out.
yea that was my next step and yes they are visible i just couldnt step bak enough for a good shot of it
