AURMEND
Junior Member
Alright this is a simple thread so you can have FRONT led turn signals and running lights. First you get a compatable MOSFET transister. This is what i got .IRFU9024 Transistor MOSFET Canal P
Then you hook it up like this.
PLEASE TAKE NOTE WHICH IS THE GATE DRAIN AND SOURCE WHEN CONNECTING THE WIRES. Its shown below.
AND THATS IT! Now you have running lights and turn signals on your 2 Wire leds. No need to spend the $25 for the pre-made ones. Cost for me is $4 but you can find it cheaper. Note: you don't need to use that exact one. You can research and find other ones with different specs.
Feel free to ask questions or comments
This is the mosfet installed and yes that's the OEM turn signal connector.
It's small! No big relays.
sorry for big picture
AND another edit. If you want POD lights and no turn signal, connect it before the Transistor. If you want it to act like a turn signal also, connect it after the Transistor. Simple.
Then you hook it up like this.
PLEASE TAKE NOTE WHICH IS THE GATE DRAIN AND SOURCE WHEN CONNECTING THE WIRES. Its shown below.
AND THATS IT! Now you have running lights and turn signals on your 2 Wire leds. No need to spend the $25 for the pre-made ones. Cost for me is $4 but you can find it cheaper. Note: you don't need to use that exact one. You can research and find other ones with different specs.
Feel free to ask questions or comments
This is the mosfet installed and yes that's the OEM turn signal connector.
It's small! No big relays.
sorry for big picture
AND another edit. If you want POD lights and no turn signal, connect it before the Transistor. If you want it to act like a turn signal also, connect it after the Transistor. Simple.
Last edited: