gkgk
New Member
Hi all, someone stole my bike, cut all the ignition and display wires in an absurd attempt to hotwire. They didn't make it but a few blocks and I got my bike back.
I've replaced the blown fuses and reconnected all the ignition and display wires. But the display stays blank and the bike won't turn over. Nothing works but the blinkers and brake lights. Battery is charged and each repaired wire shows full conductivity from end-to-end.
What else could be wrong? The fuse should have protected things, but the only thing i can think of is that they fried the MCU somehow.
Any ideas to help me troubleshoot? I'd love to get back on the road.
Thanks
2007 FZ6
I've replaced the blown fuses and reconnected all the ignition and display wires. But the display stays blank and the bike won't turn over. Nothing works but the blinkers and brake lights. Battery is charged and each repaired wire shows full conductivity from end-to-end.
What else could be wrong? The fuse should have protected things, but the only thing i can think of is that they fried the MCU somehow.
Any ideas to help me troubleshoot? I'd love to get back on the road.
Thanks
2007 FZ6