vacuum

Aloha to all, I've been searching different topics for a few days and couldn't find anything that resembles my problem. I've purchased a 2006 FZ6 with 7,800 miles which is all stock with the exception of bars, grips, levers and a 48t rear sprocket. I've only put about 100 miles on it but a few...

Vacuum Scottoiler from 2004 FZ6 - complete as it came off the bike. it was fixed onto the back/under side of the number plate. I put a tail tidy on so had to take this off. Didn't bother re-locating it elsewhere, so it's available for sale. Can be located under the seat quite easily apparently...

I just did a valve adjustment and set the the throttle vacuum to 8.5 but for some reason I cant get the idle lower than 1440. Ive even screwed the idle adjuster all the way out. Ive checked to make sure I have all the hoses reconnected and Sprayed wd-40 in the engine to see if there was a...

What would be a decent quality, not too expensive vacuum gauge to help with checking vacuum pressure for throttle bodies? Some sort of particular brand/model you'd recomment, and ideally something on Amazon or Ebay. I'd prefer to buy a single gauge as opposed to a kit of four to help with cost...

So I was working on the bike tonight and I was getting the fuel lines ready to reattach to the pump because I had the tank off. I looked down and next to the frame there was a random vacuum line that was disconnected. I didn't disconnect this line with the tank and I have no idea what it plugs...

I am on the patio, on my third ****tail watching the grill. Music is playing through the vacuum valve audio system. This space intentionally left blank.