Search results

Are this contests for Contributing ($) members only or can Junior Member Enter?

I believe it's MPH because when you program the unit, the last digit has to be a "C" to convert MPH reading to KM/PH. It's in the operating instruction supplied. Have fun with your mod. Also be careful if your tank is full of gas when raising it, I heard gas a can come out of the tank's...

Now I thinking there is still some wrong with the vent lines or tank because tonight I filled up on the way home and in the mail was my speedo healer. So I remove the front inner fairing raised the tank did the install with the tank vertical for twenty minutes and no gas ever drained from the...

Speedo Healer installed and working great. :thumbup: It's as easy as removing the inner fairing. Lift the tank unplug the tank wires if needed, plug in the harness into speed coupler, mount the unit and program your setting. Then put the tank down making necessary connections. Insert the inner...

I received my speedo healer and harness today 8/4/08. :D Thanks Ben for all your hard work to make this happen so smoothly. :thumbup: I know what I'm working on tonight. Later Guys

Wolfc70 you may have been right.:thumbup: Well I know I will not be starting the motor with the tank raised up anymore or without at least a full tank of gas. I'm glad she's back to normal.

Well my bike started right up as usual ,then I pulled the bolts out of the vents and nothing happen she kept on running. So I shut off the motor and tried to restart and it fired right back up with no problems. I'm not sure if something was suck and freed itself overnight but so far so...

Yes it was up about 4" so everything could be connected before starting. I have a little over 1/2 a tank of gas so I wouldn't think the fuel pump suck in air. But thanks for your response. Ken While the vent hoses were unpluged I tried increasing the idle screw thinking maybe it changed a...

Hey BikerDude:thumbup: Yes, I hear the fuel pump come on every time the main power and engine switch are powered. As a moderator could you move this post to Garage/ Mechanical Help. This was my first post and of course I put it in the wrong thread.:( Thanks for your response. Ken

Matt The stock chain will work with a 15t up front and a 48t in the rear. Which really made running through the gears a lot quicker. Front end gets very light :D when shifting into 2nd. I'm still waiting to hook up my speedo healer (should be here this week) to find out what highway speed...

Fred I also had a hard time believing a drain hose could cause this problem but I'm positive both hoses go to the tank. I traced them about four times before yesterday's post. Plus when lowering the tank I had to pull them as the tank lowered into position. The only thing I can think of is...

Hey Matt A gearing change maybe a 15 tooth up front, Speedo Healer, K&N filter. Good Luck out there. Ken :thumbup:

Today I was completing the Dual H4 Headlight Mod w along with installing a K&N Air Filter. When I raised the gas tank the vent hoses let off a lot of built up pressure and rusty water or old fuel came out of the hoes, they had been kinked underneath the tank by the dealer or previous owner. I...

Great, I just put a 15 tooth in front and 48 out back with a stock length chain but the speedo is way off. Please let me know who and when to send paypal payment. Thanks Ken:rockon:

If it's not to late, I also would like to get in on this group buy for the speedohealer's. Who doing the ordering?:thumbup:

Hey Formula154 An impact wrench is adjustable but not to the precision of a torque wrench. As for the 520 vs 530, I believe it's the diameter of the roller of the chain link that is the difference. 530 being 5/8" & 520 being 9/16". HavBlue if I change to 15/48 sprockets would the chain...

Here are a couple of pictures of my FE kit. Ken

I used the same F.E. with mini signal lights. You may need to open up the slots for the signal lights to fit thourgh. The connection tab spacing on mine was a little oversize. Looks great, but I had to cut and solder the original wiring for the new signals lights. I also bought a plate light...

:welcome: If your FZ6 already has a K&N air filter and after market exhaust I would think you should invest in a power commander. Everyone please correct me if I wrong but could this motor be running lean due to the K&N and after market exhaust flowing more air than the stock parts. You may...

Modifications make it your our!! :rockon: 1st F.E. Red Anadiozed FZ6 Logo (done) 2nd Frame Sliders FZ6 logo (done) 3rd Yamaha Tall Windsheild (soon) 4th Race Baffles (soon) 5th Power Commander (maybe) I'm sure there will be more to come.:Flash: