Another fz6 back on the road and one more to go needing an engine rebuild
I cant believe i've got this bikes coming in for repairs
Thanks to this forum a lot of tips and tricks from great members here.
Just sharing my weekend
My rear suspension leaked
And I have decided to rebuild it
(Note: this mod is risky if you have the money this not for you)
All oil was gone and felt like im riding a pogo stick.
Lower mount removal is a pain in the ass, blowtorch and curved vice grip is your friend here
Diassembled
Forgot to...
Random ticking sound when first start up
Sometimes there is no ticking at all.
Its gone when the engine is hot but when i parked it and start it hot it ticks
Could it be CCT failing?
Thanks!
Good day everyone
I blew my old rear suspension im looking for a replacement
I was wondering if the rear suspension from 2009-2016 fz6r will work for fz6 s1
I cant afford aftermarket rear suspension right now.
Thinking of buying used rear suspension from later bike
Stock throttle tube mod
Just sharing what a glue and a cable tie can do
Ive done a lot of this to different bikes and none of them failed.
Do this at your own risk.
https://youtube.com/shorts/QmwfSXQx15g?feature=share
Ive owned my FZ6N in less than a year and most of those times was me rebuilding the bike from junk to where it is now. Back from the dead!
Lately Ive been eyeing its bigger brother FZ1N
I saw one personally but havent ridden one.
Im having 2nd thoughts about this because i havent really ridden...
Ok so i encountered this problem twice and i cant seem to find whats causing this.
The bike ran fine no jerking or sudden power loss .
Bike revs fine and no delay when i twist the throttle
It only happens when its hot outside
How ever when i let the bike rest for a minute or so, it comes back...
Jsut sharing
LED headlight bulb doesnt seem enough
Ive installed some cheapo auxlight
And wired it with fuse and switch
Placing the ballast, relay and fuse is a problem with Naked bikes, now its tight under the tank.
That blue bracket is just temporary, its an eye sore
Good day!
So my laziness struck me.
I did not clean my hose water joint pipe. And it unveiled pitting
I noticed a raised temp when sitting in traffic light and in the verge of overheating reached full bars but not blinking (fz6n s1) on a hot summer day around 37deg celsius
Went home and checked...
Good day!
I noticed a difference between fz6n s1 and s2 regarding the horn location
S1 seems to have its horn located in radiator cap side
While the s2 is on the other side clutch lever side.
Is there anyone have a picture to confirm this?
Im going to install new dual horn for my bike, i...
I just thought some might like it
1983 kawasaki KZ1000R
Eddie lawson replica
The bike that started it all for kawasaki lime green
Its one and only here in Philippines
Good day!
Im back again with another question
Did someone here encountered a problem like mine
Error 33
It has spark at all cylinders
Injector cyl 1 and 4 is not firing
Its running 2 cylinders however when i poured gasoline in cyl 1 and 4 it all of cylinders are firing
Ive traced all the wires...
Just thought i'd share this
I have a spare time to dig deep into this
Im having problem error 33
Ive decided to crack open my ECU
Check both of the transistor for igniton coil 1 and 2
Both seems to have same values
Havent found whats causing this
I'll keep an update to this
Good day!
Does anyone here know what is the part number for body harness/loom of FZ6N S1?
I want to know if there is a difference between fz6 and fz6n body harness
Currently im looking out for parts
My chassis number RJ074
2005 FZ6N
Body harness/loom
Ignition coil set
ECU
Im having issues with...
Good day!
This may sound stupid but im kinda worried about my temperature
Fz6n S1
While moving at slow traffic my temperature gauge is stucked at 4 bars and not going down even after i started riding faster. The fan still on and doesnt turn off until i rode it on clear roads for a long while...
Good day!
What are the symptoms of a faulty IACV
2005 FZ6N
My bike idles at 1600-1700rpm coldstart
Then idles 1200-1300 when warm
But when i reached 3-4 bars of temp gauge
My idle jumps around 1300-1600 rpm and runs a bit hot sometimes rpm hangs around 2k rpm
Ive checked for vacuum leak, by...
Has anyone tried cracking open the gauge cluster of 2005 FZ6N?
I want to clean the inside reason is the reset button isn't functioning
I removed the cluster but it does not have any screw to open it.
I bought a new TPS sensor and i cant calibrate it if i cant enter diag mode.
Good day! Im wondering if the 2009 fz6r cylinder head assy will fit to 2005 fz6,
My cylinder head is warped and almost all of the valves were bent, so im considering of buying a known good used cylinder head assy,
Ive found this 2009 cylinder head assy that looks good ...
Ive finally dis assembled the engine to replace my head gasket
Im hearing strange noise upon checking the connecting rod bearing and crankshaft theres no play its not rocking so i guess its good
Cam timing chain is stretched subject for replacement also
Thing ive found is this chain and gear
I...
Good day!
So its confirmed i have a BHG due to over heating from the previous owner.
Oil is bit milky and water from radiator is contaminated with oil
Symptoms
Rough idle
Overheats
Milky engine oil
Oil in coolant
My question is, is it possible to remove cylinder head without pulling out the...